M
marylittleJul 30, 2025
Why Whirlpool 1CWTW4840 Washer won’t run or fill?
- MMarie BoydJul 30, 2025
If your Whirlpool Washer won’t run or fill, stops working, or the wash light stays on, here's what to check: * Ensure the power cord is plugged into a grounded 3-prong outlet and that the outlet has power. * Avoid using an extension cord. * Reset any tripped circuit breakers or replace blown fuses. If problems persist, it's best to contact an electrician. Also, remember that the lid must be closed for the washer to operate. The washer pauses during certain cycles, so avoid interrupting it. If the washer is tightly packed, remove a few items, rearrange the load evenly, and add detergent. After starting a cycle, do not add more than 1 or 2 additional items.