Whirlpool 1CWTW4840 - Load Laundry into Washer; Add Bleach and Softener; Select Cycle

7
5. Add fabric softener to dispenser
(on some models)
Pour a measured amount of liquid fabric
softener into dispenser; always follow
manufacturer’s directions for correct amount
offabricsoftenerbasedonyourloadsize.
Dilute liquid fabric softener by lling the
dispenser with warm water until liquid reaches the underside
of the rim. See max ll line arrows. Then select Fabric Softener
Added-Yes option or Fabric Softener Added with Extra Rinse
option.
IMPORTANT: Fabric Softener Added option must be selected
to “Yes” to ensure proper distribution at correct time in cycle.
Adding Liquid Fabric Softener Manually to Wash Load
During the nal rinse, wait until the washer has completed
lling, press the START/Pause/Unlock button to pause the
washer. Lift the lid and add the measured recommended
amount of liquid fabric softener. Do not allow liquid fabric
softener to spill, splash, drip, or run into the basket or on load.
Do not use more than the recommended amount. Close the lid
and press the START/Pause/Unlock button again to start the
washer.
4. Add liquid chlorine bleach
to dispenser
Liquid
Chlorine Bleach
Do not overll, dilute, or use more than 1 cup (250 mL).
Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach.
Load garments in loose heaps evenly
around basket wall. For best results, do
not pack the load tightly. Do not wrap large
items such as sheets around the agitator;
load them in loose piles around the sides
ofthebasket.Trymixingdifferentsized
items to reduce tangling.
3. Load laundry into washer
MAX FILL
IMPORTANT: Do not tightly pack or force items into washer.
Items need to move freely for best cleaning and to reduce
wrinkling and tangling.
Turn cycle knob to choose your wash cycle. For more
information, see “Cycle Guide”.
6. Select cycle
Model 1CWTW4840 shown