Whirlpool ADP 5550 User Manual

Whirlpool is a registered trademark of Whirlpool USA
5019 396 91231
GB
ADP 5550
Quick Reference Guide
Before using the dishwasher, read the user instructions!
WH/I/K/GB
(We reserve the right to make technical modifications)
Add rinse aid
Add regeneration salt
Only add regeneration salt immediately
before starting a wash programme.
1) Reference programme for energy label in compliance with
EN 50242 regulations;
2) Refer to “User instructions“;
3) Program data obtained in conformity with European standard
EN 50242. Values may vary in relation to usage, e.g.:
different loads, water temperatures - above or below 15°C -
as well as water hardness and power supply voltage, etc.
Program selector knob
Mains
On / Off
Start button
Switches “on” when the dishwasher is
operating. Flashes when a fault occurs.
Switches off at the end of the programme.
Indicators
Programme chart
Detergent
2)
Consumption
3)
Programmes Loading instructions A B Litres kWh Minutes
Pre-Rinse
cold
Crockery to be washed later. - - 5.0 0.02 10
Quickwash
40°C
Lightly soiled crockery with no dried-on food. X - 13.0 0.70 30
Normal
1)
50°C
Normally soiled crockery. X X 17.0 1.05 120
Normal
65°C
Normally or heavily soiled crockery. X X 17.0 1.65 90
Intensive
70°C
Recommended programme for heavily soiled
crockery, especially suitable for pans and
saucepans.
X X 18.0 1.90 125
Important information for Test Laboratories:
For detailed information on the EN comparison test and other tests, contact the following address:
“nk_customer@email.whirlpool.com”.

Whirlpool ADP 5550 Specifications

General

Type	Freestanding
Energy efficiency class	A
Washing class	A
Drying class	A
Delay start	Yes
Half load	Yes
Dimensions (H x W x D)	85 x 60 x 60 cm

Summary

Appliance Controls and Indicators

Program Selector Knob

Controls the power and program selection for the dishwasher.

Start Button

Initiates the wash cycle and indicates operational status.

Indicators

Signals the need to add rinse aid or regeneration salt.

Programme Chart

Programme Details

Lists programs, loading instructions, and consumption data like detergent, litres, kWh, and minutes.

How to Use the Appliance

Switching On and Off

Details the process for starting and ending the dishwasher operation.

Detergent and Rinse Aid

Guidance on filling detergent and checking rinse aid levels.

Salt Level and Loading

Instructions for checking salt levels and loading the racks correctly.

Programme Selection and Options

Steps for selecting a wash program and any available options.

Starting and Changing Programmes

How to start the wash cycle and modify a program if needed.

Unloading the Appliance

Safe procedures for unloading dishes after the cycle is complete.

Dishwasher Loading Instructions

Upper Rack Loading

Guidance on placing items in the upper rack, including height adjustment.

Lower Rack Loading

Instructions for loading the lower rack and plate holders.

Cutlery Basket Usage

Details on using the cutlery basket and placing sharp items safely.

Troubleshooting Common Issues

Appliance Not Working

Checks for power, water supply, and basic operational faults.

Crockery Cleaning Problems

Solutions for dishes not drying or not being perfectly clean.

Residues and Deposits

Addresses issues like sandy residues, faded plastics, and deposits on crockery.

Glassware and Cutlery Issues

Troubleshooting for cloudy glasses and rust on cutlery.

Identifying Appliance Faults

Guidance on interpreting indicator lamps and error codes.