What to do if the start/pause light and program ready light blink on my Whirlpool AWM05801 Washer?
If the start/pause light and program ready light are blinking on your Whirlpool Washer, it usually indicates that the pump has failed or the pump filter is obstructed. Try cleaning the pump filter. If the problem continues after cleaning, contact the nearest authorized service for assistance.
Why does the program ready light blink on my Whirlpool AWM05801 Washer?
If the program ready light blinks on your Whirlpool Washer, it means the water level in your machine is below the heater, possibly due to low water supply pressure or locking. Ensure the tap is fully open and check if the water supply has been cut off. If the issue persists, the machine will automatically stop after some time. Unplug the machine, turn off the tap, and contact the nearest authorized service.
What to do if the program end light blinks on my Whirlpool AWM05801?
If the program end light blinks on your Whirlpool Washer, it indicates a communication error. To resolve this, shut down your machine, unplug it, turn off the tap, and then contact the nearest authorized service.
Why is the start/ pause light blinking on my Whirlpool AWM05801 Washer?
If the start/pause light blinks on your Whirlpool Washer, it typically means the door isn't closed properly. Ensure the door is shut firmly until you hear a click. If the blinking continues, turn off the machine, unplug it, and contact the nearest authorized service immediately.
Crucial safety and operational advice for everyday appliance use.
Critical safety precautions to prevent fatal injuries and risks during operation.
Instructions for removing securing screws before the initial operation of the washing machine.
Guide on how to level the machine using its adjustable feet for stability.
Details on connecting the washing machine to the power supply for safe operation.
Instructions for correctly connecting the water supply hoses to the washing machine.
Guidance on properly connecting the drain hose for water removal from the machine.
Important safety precautions to take before performing maintenance or cleaning tasks.
Diagnosing and resolving issues when the washing machine fails to initiate operation.
Troubleshooting steps for issues related to water not filling the washing machine.
Solutions for when the washing machine fails to drain water properly.
Troubleshooting steps for E01 error code related to improper door closure.
Resolving ERR 02 errors concerning water level or supply pressure issues.
Addressing ERR 03 errors related to pump obstruction or filter blockage.
To Next Page
General