To Next PageTo Next Page
Need help?Do you have a question about the Whirlpool AWM 5100 and is the answer not in the manual?
Checks the washing machine after unpacking and advises keeping packaging away from children.
Instructions on removing transit bolts before initial use.
Guide on positioning, levelling, and preparing the machine for installation.
Details on connecting the cold water supply and required pressure.
Instructions for connecting the drain hose to a siphon or sink.
Safety guidelines and requirements for electrical connections by a qualified technician.
Advice on recycling packaging and safe disposal of old appliances.
Tips for saving energy, water, and detergent during washes.
Warning against letting children play with the washing machine.
General advice on appliance use, cleaning, maintenance, and compliance.
Identifies key parts like worktop, control panel, door, dispenser, filter, feet, and plinth.
Guides on sorting laundry, emptying pockets, and securing fasteners.
Tips for removing common stains using detergent or bleach.
Guidance on using dyes and bleaches safely in the washing machine.
Instructions on how to load laundry into the drum for efficient washing.
Factors influencing detergent choice: fabric, colour, temperature, and soiling.
Explains whitish residues and advises on storage of detergents.
Instructions for calculating detergent dosage based on load, soiling, and water hardness.
Provides a table of water hardness levels and their characteristics.
Step-by-step guide to selecting and starting a washing programme.
Explains options like Easy Ironing, Energy Save, Quick Wash, Intensive Rinse, Rinse Hold, Spin Reduction, No Spin, Half Load, Cold Wash.
Instructions for setting a delayed start time for the washing programme.
Explains how the door locks automatically during the programme.
Steps to follow after the washing programme has finished.
How to change the selected programme or options during operation.
How to pause, resume, or terminate a running washing programme.
Guidance on cleaning the exterior surfaces and control panel.
How to clean and periodically check the door seal for foreign objects.
Instructions for removing, cleaning, and refitting the detergent dispenser.
Specific steps for cleaning the filter on models with a straight hose.
Specific steps for cleaning the filter on models with a Water Stop hose.
Checks for power, door closure, programme selection, and water tap status.
Checks for program pauses, water supply, and drain issues.
Addresses vibration, imbalance, and poor spin results.
Actions for water leakage detection and pump running continuously.
Checks siphon, water supply, and mesh filters for residues.
Detailed steps for removing transit bolts for initial installation.
How to adjust the levelling feet to ensure stability on uneven floors.
Steps for connecting the water inlet hose to the tap for straight hose models.
Steps for connecting the water inlet hose to the tap for Water Stop hose models.
Instructions for connecting the drain hose externally to a siphon or sink.
Instructions for connecting the drain hose internally.
General