EasyManua.ls Logo

Whirlpool AWM 6080 User Manual

Whirlpool AWM 6080
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
5019 301 10137
Whirlpool is a registered trademark of Whirlpool USA
Programme
Care
Labels
Type of wash/Notes
Max
Load
Kg
Detergents and additives Special options Max
Spin
Speed
rpm
Temperature
Selector
°C
Programme
Selector
Bleach Softener Main
Wash
Pre-
wash
Easy
Ironing
Prewash Intensive
Rinse
Rinse
Hold
Spin Speed
Reduction
Cotton/
Coloured cotton
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts
etc. made of cotton and linen.
With heavily soiled laundry the additional “Prewash” option can be selected as well.
5.0
❉❉
Ye s
❉❉
800
Max. 95°
Synthetics
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),
polyamide (Perlon, Nylon) or blends with cotton.
2.5
Ye s
❉❉
1)
600
1)
Max. 60°
Daily
Slightly to normally soiled textiles made of cotton and/or synthetics.
3.0
Ye s
❉❉❉
800
Max. 60°
Rapid Plus
Shortly worn outer clothing made of cotton, polyester, polyamide and blends
with cotton.
3.0
Ye s
❉❉❉
800
Max. 30°
Delicates
Curtains and delicate clothing, dresses skirts, shirts and blouses.
1.5
Ye s
1)
600
1)
Max. 40°
Wool
Only woollens with a felt-free finish, labelled with the woolmark and identified as
machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.
1.0
Ye s
——
1)
600
1)
Max. 40°
Handwash
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is
used in this programme.
1.0
Ye s
——
2)
400
2)
Max. 30°
Rinse + spin
Same as the last rinse and the final spin in the “Coloured Cotton” programme.
5.0
——
❉❉❉
800
Spin
In this programme spinning is intensive. Same as the spin cycle in the “Coloured
Cotton” programme.
5.0
——
800
Gentle spin
In this programme spinning is gentle. Same as the spin cycle in the “Wool”
programme.
1.5
——
1)
600
1)
Drain
Drain only - no spinning. Alternative method of terminating programme after “Rinse
Hold”.
——
——
A. Programme Sequence Indicator
B. “Start/Pause” Button
C. “Door Open” Indication
D. Temperature Adjusting Buttons
E. “Spin Speed Reduction” Button
Selecting any option the indication lights up.
When the combination of programme,
additional options and temperature is not
possible, the indication lights switch off
automatically. Unsuitable combinations of
options are deselected automatically.
: optional / Yes: dosing required
1
For improved garment care spin speed is restricted to
600 rpm in this programme.
2
In this programme default spin speed can be increased
till 400 rpm.
BAC
E
D
AWM 6080
GB
PROGRAMME CHART
Question and Answer IconNeed help?

Do you have a question about the Whirlpool AWM 6080 and is the answer not in the manual?

Whirlpool AWM 6080 Specifications

General IconGeneral
BrandWhirlpool
ModelAWM 6080
CategoryWasher
LanguageEnglish

Summary

Washing Machine Programme Chart Overview

Programme Sequence Indicator

Indicates the current stage of the washing cycle, showing progress through Wash, Rinse, and Spin phases.

Start/Pause Button

Used to start, pause, and resume the selected washing program.

Door Open Indication

Light indicates when the machine door is unlocked and safe to open.

Temperature Adjusting Buttons

Allows users to select and modify the wash temperature for the chosen program.

Spin Speed Reduction Button

Enables adjustment of the spin speed, including reduction or cancellation.

Washing Machine Consumption Data and Operation

Programme Selection Guide

Step-by-step instructions for selecting a wash program, temperature, and spin speed.

Wash Program Options Explained

Details on special wash options like Prewash, Intensive Rinse, and Rinse Hold for enhanced results.

Programme Start, End, and Door Lock

Procedures for initiating a wash cycle, ending the program, and understanding door lock status.

Modifying and Cancelling Programs

Instructions on how to change settings during a cycle or cancel a program before completion.

Related product manuals