To Next Page
M
Mrs. Amanda MaynardJul 31, 2025
What to do if my Whirlpool Cabrio 6AWTW5700XW Washer won’t run or fill?
- MMichael AdamsJul 31, 2025
If your Whirlpool Washer isn’t running or filling, make sure both hoses are properly attached and that water is flowing to the inlet valve. Also, check that both the hot and cold water taps are fully turned on. It's also crucial to inspect the inlet valve screens for any clogs and ensure that the inlet hoses aren't kinked, as this can restrict water flow. Verify that the washer is properly connected to a power outlet without using an extension cord, and check the circuit breaker and fuses. If problems persist, consult with an electrician.
General
