Whirlpool CALYPSO WashMotion GVW9959K-0 User Manual (English)

Questions and Answers:

E
Elizabeth PhillipsSep 9, 2025
How to prevent wrinkled loads in my Whirlpool CALYPSO WashMotion GVW9959K-0?
- J
  Joshua RamosSep 9, 2025
  If your Whirlpool Washer load is wrinkled, unload the washer as soon as it stops. Use cold rinses and cycles with slow spin speeds to reduce wrinkling. Ensure loads can move freely during washing by washing smaller loads. If safe for the fabric, use Automatic Temperature Control (ATC) with warm or hot wash water, and always use cold rinse water. Also, check if the hoses are reversed and correct them according to the installation instructions.
D
David CraigSep 12, 2025
What causes my Whirlpool CALYPSO WashMotion GVW9959K-0 Washer to keep tripping the GFI?
- C
  christopherblankenshipSep 12, 2025
  If your Whirlpool Washer is tripping the GFI, check the shield capacitor. If it's shorted, replace the lower wiring harness. Also, check the continuity of the front and lower cabinet interlock switches. These switches are normally closed and should show an open circuit with the cabinet panels in place.
K
Kyle CardenasSep 13, 2025
Why won’t my Whirlpool CALYPSO WashMotion GVW9959K-0 Washer recirculate rinse water?
- R
  ronniealvarezSep 13, 2025
  If your Whirlpool Washer is not recirculating rinse water, check the pump motor windings and wiring harness connectors. Also, check the pump for a cracked or broken impeller and inspect the impeller drive connector at the pump motor. Finally, check the recirc tube for blockage and proper connection to the tub recirc spout.

Whirlpool CALYPSO WashMotion GVW9959K-0 Specifications

General

Brand	Whirlpool
Model	CALYPSO WashMotion GVW9959K-0
Category	Washer
Color	White
Programs	Delicates, Hand Wash, Heavy Duty, Normal, Quick Wash
Type	Top Load Washer