REVERSING THE DOOR STOP
If needed, the door stop of the dryer door can be
reversed. Use pliers and a cross-head screwdriver for
the procedure.
For removing and xing the door, the help of a
second person is recommended. Make sure that the
dryer is unplugged. Open the dryer door.
3. Press the small knob above the door lock with
a small screwdriver. At the same time move upwards
the door lock and pull it towards you with your
nger.
4. Remove the 2 screws on the door hinge and
take o the door.
1. Use pliers to turn the contact pin at the inside
of the door towards the right by 90° and pull it out.
2. Unscrew the 2 screws above and below the
door lock system.
To Next Page
Loading...
