What to do if my Whirlpool DE20W5252 appliance does not work?
First, verify that the POWER button is pressed. Then, ensure the plug is properly inserted and making good contact. Also, check if the Timer function is active. If none of these resolve the issue, wait 3 minutes before restarting the appliance, as the protection device may be preventing operation.
Why is my Whirlpool DE20W5252 Dehumidifier not working and the controls cannot be set?
This is a protection feature. The appliance will not operate if the room temperature exceeds 32°C or drops below 5°C.
What to do if my Whirlpool Dehumidifier humidity does not decrease?
The area you are trying to dehumidify might be too large for the dehumidifier's capacity. Also, check if any doors are open, or if there are devices generating vapor in the room, as these factors can prevent the humidity from decreasing.
What to do if there is little or no dehumidifying effect with my Whirlpool DE20W5252?
This can happen when the room temperature and/or humidity are too low.
What does E2 mean on my Whirlpool DE20W5252 Dehumidifier?
E2 in the LED display means that the humidity and temperature sensor was damaged.
Why did my Whirlpool DE20W5252 Dehumidifier switch off during use?
The appliance may have switched off because the room is too small, causing the compressor to overheat and automatically shut off. Unplug the unit, address the room size issue, wait about 45 minutes, and then restart it. Alternatively, in Continuous mode, the appliance stops when the water bucket is full, extracted, or incorrectly positioned. In the continuous drainage mode, improper hose installation or an uneven surface may cause water to fill the bucket, leading to the appliance switching off. In this case, empty the water bucket and check the dehumidifier's location and hose setup.
Why is my Whirlpool Dehumidifier so noisy?
The appliance may be a bit noisy if it is operating on a wooden floor.
Why can't I adjust fan speed on my Whirlpool Dehumidifier?
The fan speed cannot be adjusted in the Continuous, 6th sense and Laundry program modes.
Why can't I adjust the humidity setting on my Whirlpool DE20W5252?
The humidity level cannot be adjusted in the Continuous, 6th sense and Laundry program modes.
Why does my Whirlpool DE20W5252 Dehumidifier make a swooshing sound?
This is normal; it is the sound of the refrigerant flow.
Essential warnings, guidelines for safe operation, and intended use of the appliance.
Critical safety procedures for appliance installation and electrical connections.
Safe practices for cleaning, maintenance, and responsible disposal of the appliance.
Specific safety protocols for servicing involving flammable refrigerants and leak detection.
Identifies and labels the main parts and features of the dehumidifier.
Explains the function of each button and indicator on the control panel.
Covers first-time use, switching on/off, and descriptions of operating modes.
Guides on setting humidity, fan speed, and activating Sleep Mode.
Details on Timer, Child Lock, Auto-Stop, Auto-Defrost, and water drainage methods.
Advice on proper procedures for when the appliance is not in use.
Instructions on positioning the appliance, required clearances, and environmental conditions.
Guidelines for safe handling, moving, and initial operation during setup.
Lists common issues like noise, low dehumidifying effect, and appliance not working, with solutions.
Steps to take before contacting customer care and information to provide.
Essential warnings, guidelines for safe operation, and intended use of the appliance.
Critical safety procedures for appliance installation and electrical connections.
Safe practices for cleaning, maintenance, and responsible disposal of the appliance.
Specific safety protocols for servicing involving flammable refrigerants and leak detection.
Identifies and labels the main parts and features of the dehumidifier.
Explains the function of each button and indicator on the control panel.
Covers first-time use, switching on/off, and descriptions of operating modes.
Guides on setting humidity, fan speed, and activating Sleep Mode.
Details on Timer, Child Lock, Auto-Stop, Auto-Defrost, and water drainage methods.
Advice on proper procedures for when the appliance is not in use.
Instructions on positioning the appliance, required clearances, and environmental conditions.
Guidelines for safe handling, moving, and initial operation during setup.
Lists common issues like noise, low dehumidifying effect, and appliance not working, with solutions.
Steps to take before contacting customer care and information to provide.
General| Brand | Whirlpool |
|---|---|
| Model | DE20W5252 |
| Category | Dehumidifier |
| Language | English |
To Next Page