Whirlpool Dehumidifier - Draining the Dehumidifier; Option 1 Remove Bucket; Option 2 Connect Drain Hose

A
8
Draining the Dehumidifier
1. Grasp the bucket sides to slide out bucket.
Option 1 Remove Bucket
If you floor drain is not available, or you do not plan to run your
dehumidifier continuously, you may want to simply empty the bucket.
Grasp the handle and bottom of the bucket to lift bucket.
Pour water through opening into a sink or tub.
3.
4. Replace the handle ,and reinstall bucket.
IMPORTANT:
If the Water full light comes on, the dehumidifier will not
operate. Empty or adjust bucket.
Option 2 Connect Drain Hose
If you plan to run your dehumidifier continuously, you may want
to choose direct draining by attaching a garden hose to the unit.
1. Remove screws from connector cover.
A.Drain hose connector cover
2. Attach a garden hose to drain hose connector of the
B
A
A.Garden hose
B.Drain hose connector
dehumidifier. Hand tighten.
NOTES:
The hose is sold separately.