EasyManua.ls Logo

Whirlpool Design 2000 - Winterizing the Washer; Preparing for Cold Weather

Whirlpool Design 2000
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Winterizing
Because some water stays In the washer, freez-
rna can cause a lot of damaae If vour washer IS
stored or moved durrng the cold weather
1. Shut off both water
faucets Drscon-
nect and dram
water Inlet hoses
2. Put a quart of
automobrle-type
antrfreeze rn the
basket
To use the washer again.. .
4. Run the washer
through a com-
plete cycle with
one cup of deter-
1. Flush water pipes and hoses
gent to’clean out
2. Connect hoses to the washer
the antifreeze
3. Set the washer for a
DRAIN and SPIN
[see pagelO) Let it
run for about 30
seconds to mrx the
antifreeze and
water
3. Turn on the water faucets.
13

Related product manuals