Whirlpool Energy Smart 188410 User Manual

1
PRINTED IN THE U.S.A 0411 PART NO. 318686-000
GRID
ENABLED
VACATION
STANDARD
ENERGY
SMART
°F/°C
F
Residential Electric
Water Heater
Installation
Instructions and
Use & Care Guide
To obstain technical, warranty, or service assistance during or after the
installation of this water heater, visit our website at:
http://www.whirlpoolwaterheatersupport.com
or call tool free
1-877-817-6750
When calling for assistance, please have the following information ready:
1. Model Number 4. Date of Installation
2. 7 Digit Product Number 5. Place of Purchase
3. Serial Number
Table Of Contents PAGE
Water Heater Safety ............................................................................ 2
Installing Your Electric Water Heater ................................................... 3-9
Unpacking Instructions ................................................................... 3
Location Requirements .................................................................. 4
Water System Piping ................................................................... 5
Electrical Requirements ................................................................. 7
Installation Checklist ...................................................................... 9
Operating Your Water Heater ............................................................. 10-12
Water Heater Start-Up ................................................................... 10
Water Temperature Regulation ...................................................... 10
Energy Smart
®
Module/Operational Modes ................................... 11
Electronic Thermostat .................................................................... 12
Smart Grid Technology .................................................................. 13
Operational Conditions ................................................................... 14
Maintenance of Your Water Heater .................................................... 15-23
Diagnostic Code (ESM)..................................................................17-18
Diagnostic Code (ET).................................................................... 19-20
Trouble Shooting Chart .....................................................................21
Repair Parts illustration ................................................................... 22
Thermostat Wiring Diagram ............................................................ 23
LOW LEAD
COMPLIANT
®
®

Whirlpool Energy Smart 188410 Specifications

General

Brand	Whirlpool
Model	Energy Smart 188410
Category	Water Heater
Language	English

Summary

Water Heater Safety

Important Safety Instructions

Discusses hydrogen gas risks and California Prop 65 warnings.

Installing Your Electric Water Heater

Consumer Information

Details local code requirements and installation standards for safe setup.

Consumer Responsibilities

Outlines user duties for proper installation, operation, and maintenance.

Insulation Blankets

States insulation blankets are not needed as the heater meets energy standards.

Unpacking the Water Heater

Provides instructions on safely unpacking and inspecting the water heater before installation.

Location Requirements

Guides on selecting an appropriate indoor location, considering piping, freezing, and damage prevention.

Water System Piping

Covers connecting cold and hot water supply lines, using dielectric unions, and installing shut-off valves.

Temperature and Pressure Relief Valve

Explains the function and installation requirements of the T&P relief valve and thermal expansion.

The Temperature & Pressure Relief Valve

Details requirements for the T&P relief valve and its discharge line.

Electrical Requirements

Outlines safety hazards and requirements for connecting the water heater to the electrical supply.

INSTALLATION CHECKLIST

A checklist to ensure all installation steps and requirements have been met correctly.

Operating Your Water Heater

Water Heater Start-Up

Step-by-step guide for filling the tank, powering on, and running initial diagnostics.

Water Temperature Regulation

Explains how to set water temperature, risks of high temperatures, and recommended settings.

Adjusting the Energy Smart® Module/Operational Modes

Describes how to adjust the water temperature and select operational modes.

The Electronic Thermostat

Explains the function and operation of the electronic thermostat.

Smart Grid Technology

Explains the benefits and function of Smart Grid technology for energy management.

Operational Conditions

Discusses anode rod, water odor, normal sounds, and stacking phenomenon.

Maintenance of Your Water Heater

Draining and Flushing

Provides instructions for draining and flushing the tank to remove sediment.

Replacing the Anode Rod

Step-by-step guide for replacing the water heater's anode rod.

Temperature and Pressure Relief Valve

Instructions on manually testing the temperature and pressure relief valve for proper function.

Diagnostic Code Chart Energy Smart® Module (ESM)

Diagnostic Code Chart Energy Smart® Module (ESM)

Lists ESM error codes, their indications, and corrective actions.

Diagnostic Code Chart Electronic Thermostat (ET)

Diagnostic Code Chart Electronic Thermostat (ET)

Lists ET error codes, their indications, and corrective actions.

Troubleshooting Chart

Troubleshooting Chart

A chart listing common problems, their possible causes, and corrective actions.

Repair Parts Illustration

Repair Parts

Information on how and where to order replacement parts for the water heater.

Repair Parts List

A list of components with item numbers for ordering replacement parts.

Thermostat Wiring Diagram

Thermostat Wiring Diagram

Illustrates the electrical connections for the thermostat and heating elements.

Branch Circuit Sizing Guide

Provides guidance on selecting the correct wire size and circuit breaker for electrical connections.