To Next PageTo Next Page
Need help?Do you have a question about the Whirlpool 12307 and is the answer not in the manual?
General| Fuel Type | Electric |
|---|---|
| Brand | Whirlpool |
| Model Number | 12307 |
| Product Type | Water Heater |
| Energy Factor | 0.95 |
| Voltage | 240 V |
| Wattage | 4500 W |
| Warranty | 6 years |
Key safety guidelines and warnings for appliance operation.
Defines the meaning of the safety alert symbol and hazard words.
Critical details on product sensitivity and installation requirements.
Details on product certification and user responsibilities for installation.
User duties for installation and operation.
Steps for safely unpacking and inspecting the water heater.
Guidelines for selecting a safe and appropriate location for the water heater.
Specific criteria for choosing the water heater's placement.
Maintaining adequate space around the unit for service and safety.
Requirements for bracing the water heater in California.
Ensuring the correct gas type and pressure for the water heater.
Procedures for connecting the gas supply line and ensuring proper piping.
Ensuring adequate air for combustion and ventilation.
Air volume needs for water heaters in open areas.
Air volume needs for water heaters in enclosed spaces.
Methods for providing outside air for combustion.
Guidance on installing the vent pipe system for safe exhaust removal.
Correct procedure for attaching the drafthood.
Guidelines for connecting the vent to a chimney.
Instructions for installing vertical vent pipes.
Instructions for connecting water lines.
Guidance on installing a valve to limit water temperature.
Addressing pressure buildup in closed water systems.
Requirements and installation of the T&P relief valve.
Specific instructions for non-standard installation types.
A comprehensive checklist to ensure all installation steps are completed.
Step-by-step guide for safely lighting the pilot and main burner.
Specific operational considerations for L.P. gas models.
Procedures for inspecting draft and burner flames.
How to handle stacking, shut down in emergencies, and adjust water temperature.
Normal operational noises, condensation, and initial smoke/odor.
Explanation of automatic safety shut-off mechanisms.
Information on the anode rod's function and potential water odor problems.
Recommended procedures for tank draining and flushing.
Annual visual inspection of key components.
Guidance on testing and maintaining the T&P relief valve.
Steps to remove the manifold assembly.
Steps to remove and clean the burner assembly.
Detailed steps for replacing the thermocouple.
How to inspect and clean the flame-trap.
Steps to replace the manifold assembly.
Information on the igniter system and its components.
Procedures for removing and replacing the gas control valve/thermostat.
A checklist for the Flame Lock™ safety system components.
A diagnostic flowchart for pilot light issues.
An itemized list of available replacement parts for the water heater.
Visuals and descriptions of listed parts kits.
