Whirlpool HB10813 - Maintenance and Safety Items; Front Panel and Filter Cleaning

- 15 -
澬Maintenance and Safety Items澭
 Maintenance and cleaning:
භ Please do turn off the power before maintenance work.
1. Front panel cleaning:
ӑ Please use the soft rag t
o clean the dirty place of the front panel.
ӑ Put a clean rag in the warm water dissolved with neutral detergent, and then use
the rag to wipe the front panel. Use another rag to wipe the cover. The surface
shall have no detergent residues.
2. Filter Cleaning:
A. Pre-Filter
ӑ Use a rechargeable handheld vacuum cleaner to remove dust from the filter or
wash it in the water. Please make sure the filter is completely dried out before
putting back to the machine. It is recommended to clean the filter regularly to
ensure its efficiency.
B. Carbon Filter
ӑ
Need to replace the carbon filter after usage for some time. In general, it is
recommended to replace the filter for every 3 months’ usage but the actual
r
eplacement is subject to the frequency of usage
and air quality of living
environment.
(Remark: The carbon filter is not washable.)
Installation of Carbon Filter:
1.
Pull out the Pre-
filter from the
righ
t side of front panel.
2.
Unpack the filter packaging.
Place the carbon filter on the
pre
-filter and by attaching it onto
the various hooks.
3
. Put the Pre-
filter back to the
machine.
Front Panel
Filter