What to do if the colon is flashing on my Whirlpool MH3184XPB?
If you see a flashing colon on your Whirlpool Microwave Oven, simply press any key to stop the flashing. When in standby mode, the colon should then be steady.
What to do if my Whirlpool MH3184XPB Microwave Oven humidity sensor is out of range?
If the humidity sensor on your Whirlpool Microwave Oven is out of range: 1. Unplug the microwave or disconnect the power. 2. Connect a new sensor to the electronic control (at P1). 3. Replace all parts and panels before operating. 4. Plug the microwave back in or reconnect the power. 5. If the problem continues, unplug the microwave or disconnect the power again. 6. Replace the electronic control. 7. Replace all parts and panels before operating. 8. Plug the microwave back in or reconnect the power.
What to do if my Whirlpool MH3184XPB Microwave Oven has a microwave relay failure?
If you're experiencing a microwave relay failure with your Whirlpool Microwave Oven: 1. Unplug the microwave or disconnect the power. 2. Check the wiring to Relay 4903 for short circuits. 3. If the wiring is okay, replace the electronic control. 4. Replace all parts and panels before operating. 5. Plug the microwave back in or reconnect the power.
How to fix a membrane switch failure on a Whirlpool MH3184XPB?
To address a membrane switch failure on your Whirlpool Microwave Oven: 1. Unplug the microwave or disconnect the power. 2. Replace the membrane switch. 3. If the issue remains, replace the electronic control. 4. Replace all parts and panels before operating. 5. Plug the microwave back in or reconnect the power.
General| Type | Countertop |
|---|---|
| Capacity | 1.8 cu. ft. |
| Power | 1000 Watts |
| Control Type | Electronic |
| Wattage | 1000 Watts |
| Turntable | Yes |
| Cooking Presets | Yes |
| Turntable Diameter | 12 inches |
| Color | Black |
| Sensor Cooking | Yes |
| Child Lock | Yes |
| Defrost Function | Yes |
| Display Type | Digital |
To Next Page
