Whirlpool MH7lOOXY - Page 29

The Cook-top light:
Electrical Shock Hazard
Turn off power at main
power supply before re-
placing the light bulb.
Failure to do so could re-
sult in electrical shock.
The Oven Light:
.
I
Electrical Shock Hazard
Turn off power at main
power supply before re-
placing the light bulb.
Failure to do so could re-
suit in electrical shock.
I I
5. Lift up the bulb holder.
2. R
emove the bulb cover
mounting screws.
3. We recommend replacing
bulb(s) with candetabra-
base 30-watt bulb(s) avail-
able from your authorized
WhirlpoolSM service com-
pany (Part No. 4158432).
2. Remove the vent cover
mounting screws.
3. Tip the cover forward, then
lift out to remove.
6. We recommend replacing
bulb with candelabra-base
30-watt bulb available from
your authorized Whirlpools”
service company (Part No.
4158432).
7. Replace the bulb holder
and mounting screw.
4. Remove bulb holder
mounting screw.
a
8. Slide the top of the vent
cover into place. Push the
bottom until it snaps into
place. Replace the mount-
ing screws. Turn the power
back on at main power
SUPPlY.
,
29