Setting the clock
When you first plug in your microwave oven,
the Display flashes “88:88”. If the electric
power ever goes off, the Display will again
flash all 8’s when the power comes back on.
NOTES:
l
You can cook without setting the clock,
but the Display will not show the correct
time of day after cooking.
l
To reset the clock, touch AUTO START/
CLOCK. A “0” will show on the Display.
Continue to set the clock as shown below.
. If you have touched in an incorrect time,
such as 12:65, “ERROR” will show on the
Display. Touch OFF/CANCEL, then touch
AUTO START/CLOCK and start over.
To set time:
1. Choose setting.
TOUCH
YOU SEE
AUTO START
L-J
CLOCK
2. Enter time of day.
Example for 3:25:
TOUCH
YOU SEE
8 -
cl
5
3. Complete entry.
TOUCH
YOU SEE
16
To Next Page
Loading...
