Adjusting the Oven Temperature Control
Does your oven seem hotter or colder than your old oven? The temperature
of your old oven may have shifted gradually without you noticing the change.
Your new oven is properly adjusted to provide accurate temperatures. But when
comparing to your old oven, the new design may give you different results.
If after using the oven for a period of time, you are not satisfied with the
temperature settings, they can be adjusted by following these steps:
1.
Pull the Oven Temperature Control
Knob straight off.
OFF
3. To lower the temperaturq move
a notch closer to LO. Each notch
equals aboutlOaF (5°C).
2. Loosen the locking screw. Note
the position of the notches.
OFF
4.
To raise the temperature, move
a notch closer to HI. Each notch
equals aboutlO”F (S’C).
Tighten the locking screw and
replace the control knob.
To Next Page
Loading...
