30
COIL ELEMENTS AND REFLECTOR BOWLS (MODELS RF360BXE AND RF360PXE)
Removing
1. Make sure all coil elements are off and cool
before removing coil elements and reflector
bowls.
2. Push in the edge of the coil element opposite
the receptacle. Then lift it just enough to clear
the reflector bowl.
3. Pull the coil element straight away from
the receptacle.
4. Lift out the reflector bowl. See the “Cleaning
chart” earlier in this section for cleaning
instructions.
BAKE
OFF
BAKE
CARING FOR YOUR RANGE
To Next Page
Loading...
