To Next PageTo Next PageWhy is my Whirlpool SPOW 412 not cooling or heating?
If your Whirlpool Air Conditioner isn't cooling or heating, check a few things: * Make sure the air filter is clean. * Ensure that nothing is blocking the air intakes and outlets. * Verify that the temperature is set correctly. * Confirm that all doors and windows are closed.
What to do if my Whirlpool SPOW 412 does not run?
If your Whirlpool Air Conditioner doesn't run, consider the following: * Check if a fuse is blown or if the protection device has tripped. * Wait 3 minutes before restarting, as the protection device may be preventing operation. * Check the remote control batteries. * Ensure the plug is properly inserted into the outlet.
What to do if my Whirlpool SPOW 412 control is ineffective?
If you experience ineffective control with your Whirlpool Air Conditioner due to strong interference (like excessive static electricity or power supply voltage abnormality), unplug the unit from the power supply and plug it back in after 2-3 seconds.
Why does my Whirlpool SPOW 412 Air Conditioner have a peculiar smell?
A peculiar smell coming from your Whirlpool Air Conditioner may originate from external sources like furniture or cigarette smoke. The unit may be drawing in these odors and circulating them with the air.
Why does my Whirlpool SPOW 412 not operate immediately?
Your Whirlpool Air Conditioner has a built-in 3-minute delay when changing modes during operation.
Why does my Whirlpool SPOW 412 Air Conditioner make a sound of running water?
The sound of running water in your Whirlpool Air Conditioner is normal. It's caused by the flow of refrigerant within the system or defrosting sound in heating mode.
Why does my Whirlpool Air Conditioner make a cracking sound?
A cracking sound from your Whirlpool Air Conditioner may be due to the expansion or contraction of the front panel caused by temperature changes.
Why does my Whirlpool SPOW 412 spray mist from the outlet?
If you notice mist spraying from the outlet of your Whirlpool Air Conditioner, especially in a low-temperature room, this is normal behavior. It's due to cool air being discharged from the indoor unit during COOLING or DRY operation mode.
What does it mean when the running indicator flashes but indoor fan stops on my Whirlpool SPOW 412?
When the running indicator flashes and the indoor fan stops on your Whirlpool Air Conditioner, the unit is shifting from heating mode to defrost. The indicator will turn off and then return to heating mode.
General| Brand | Whirlpool |
|---|---|
| Model | SPOW 412 |
| Category | Air Conditioner |
| Language | English |
Essential safety guidelines and precautions to follow before operating the appliance.
How to cycle through and select Cooling, Dry, Fan Only, and Heating modes.
Adjusting fan speed through Auto, High, Medium, and Low settings.
How to adjust the desired temperature setting.
Explanation of 6th Sense mode and its automatic settings.
Details on activating SLEEP mode for comfortable sleep.
Information on using JET mode for rapid cooling or heating.
Step-by-step guide to setting the timer to turn the unit on.
Details the energy-saving POWER SAVE mode.
Manual control of the unit via the indoor unit's switch.
How to set and cancel the auto-restart feature.
Explains anti-freezing, preheating, and defrosting protection.
Steps for cleaning the air filter and resetting the monitor.
Guide to common issues, their analysis, and potential fixes.
Visual guide for recommended installation clearances.
Key safety measures for power supply, grounding, and breakers.
Step-by-step guide for removing air and moisture from tubes.
