To Next PageTo Next PageWhy is my Whirlpool SPIW412/2 Air Conditioner not cooling or heating?
Your Whirlpool Air Conditioner might not be cooling or heating properly due to several reasons. First, check if the air filter is dirty. Also, ensure that the air intakes and outlets are not blocked. Confirm that the temperature is set correctly and that all doors and windows are closed.
What to do if my Whirlpool SPIW412/2 Air Conditioner does not run?
If your Whirlpool Air Conditioner doesn't run, check a few things. First, see if the protection device or fuse has blown. If not, wait three minutes and try again, as the protection device may be preventing the unit from starting. Also, check the remote control batteries and ensure the unit is properly plugged in.
How to fix ineffective control of Whirlpool Air Conditioner?
If you are experiencing ineffective control with your Whirlpool Air Conditioner, it might be due to strong interference such as excessive static electricity discharge or power supply voltage abnormality. Unplug the unit from the power supply and plug it back in after 2-3 seconds.
Why does my Whirlpool SPIW412/2 have a peculiar smell?
A peculiar smell from your Whirlpool Air Conditioner may originate from external sources like furniture or cigarette smoke. The unit might be drawing these odors in and expelling them with the air.
Why does mist spray from the Whirlpool SPIW412/2 outlet?
If you notice mist spraying from the outlet of your Whirlpool Air Conditioner, especially in a room with low temperature, this is normal. It's due to the cool air discharged from the indoor unit during COOLING or DRY operation mode.
What is the sound of running water in my Whirlpool SPIW412/2 Air Conditioner?
If you hear a sound of running water in your Whirlpool Air Conditioner, it is normal. This is caused by the flow of refrigerant within the system. It can also be a defrosting sound when the unit is in heating mode.
Why does my Whirlpool SPIW412/2 Air Conditioner not operate immediately?
When changing modes during operation, your Whirlpool Air Conditioner will have a 3-minute delay.
What causes a cracking sound in my Whirlpool SPIW412/2 Air Conditioner?
A cracking sound from your Whirlpool Air Conditioner may be generated by the expansion or contraction of the front panel due to temperature changes.
What does it mean if the running indicator flashes but the indoor fan stops on my Whirlpool SPIW412/2 Air Conditioner?
If the running indicator flashes but the indoor fan stops on your Whirlpool Air Conditioner, the unit is shifting from heating mode to defrost. The indicator will light off and then return to heating mode.
Key safety advice and precautions to observe before and during appliance use.
Guidelines and warnings for safe and correct installation of the appliance.
Critical electrical safety requirements, wiring, and protection measures.
Detailed description of buttons and their functions on the remote controller.
Visual guide for unit placement and required distances.
Table listing common operational problems and their possible analyses.
Steps to take before contacting service and information to provide.
Key safety advice and precautions to observe before and during appliance use.
Guidelines and warnings for safe and correct installation of the appliance.
Critical electrical safety requirements, wiring, and protection measures.
Detailed description of buttons and their functions on the remote controller.
Visual guide for unit placement and required distances.
Table listing common operational problems and their possible analyses.
Steps to take before contacting service and information to provide.
General| Type | Split AC |
|---|---|
| Energy Efficiency Ratio (EER) | 3.21 |
| Refrigerant | R32 |
| Star Rating | 3 Star |
| Compressor Type | Rotary |
| Energy Efficiency Class Cooling | A |
| Indoor Unit Noise Level | 40 dB |
| Outdoor Unit Noise Level | 50 dB |
| Noise Level | Indoor: 40 dB |
| Power Supply | 220-240 V, 50 Hz |
| Operating Temperature (Heating) | Not applicable |
