To Next PageTo Next PageWhy is my Whirlpool Air Conditioner not cooling or heating?
If your Whirlpool Air Conditioner isn't cooling or heating, check a few things: * Make sure the air filter is clean. * Ensure that nothing is blocking the air intakes and outlets. * Verify that the temperature is set correctly. * Confirm that all doors and windows are closed.
What to do if my Whirlpool Air Conditioner does not run?
If your Whirlpool Air Conditioner doesn't run, consider the following: * Check if a fuse is blown or if the protection device has tripped. * Wait 3 minutes before restarting, as the protection device may be preventing operation. * Check the remote control batteries. * Ensure the plug is properly inserted into the outlet.
What to do if my Whirlpool SPOW 409 Air Conditioner control is ineffective?
If you experience ineffective control with your Whirlpool Air Conditioner due to strong interference (like excessive static electricity or power supply voltage abnormality), unplug the unit from the power supply and plug it back in after 2-3 seconds.
Why does my Whirlpool SPOW 409 have a peculiar smell?
A peculiar smell coming from your Whirlpool Air Conditioner may originate from external sources like furniture or cigarette smoke. The unit may be drawing in these odors and circulating them with the air.
Why does my Whirlpool SPOW 409 Air Conditioner not operate immediately?
Your Whirlpool Air Conditioner has a built-in 3-minute delay when changing modes during operation.
Why does my Whirlpool Air Conditioner make a sound of running water?
The sound of running water in your Whirlpool Air Conditioner is normal. It's caused by the flow of refrigerant within the system or defrosting sound in heating mode.
Why does my Whirlpool SPOW 409 Air Conditioner make a cracking sound?
A cracking sound from your Whirlpool Air Conditioner may be due to the expansion or contraction of the front panel caused by temperature changes.
Why does my Whirlpool SPOW 409 spray mist from the outlet?
If you notice mist spraying from the outlet of your Whirlpool Air Conditioner, especially in a low-temperature room, this is normal behavior. It's due to cool air being discharged from the indoor unit during COOLING or DRY operation mode.
What does it mean when the running indicator flashes but indoor fan stops on my Whirlpool SPOW 409 Air Conditioner?
When the running indicator flashes and the indoor fan stops on your Whirlpool Air Conditioner, the unit is shifting from heating mode to defrost. The indicator will turn off and then return to heating mode.
General| Brand | Whirlpool |
|---|---|
| Model | SPOW 409 |
| Category | Air Conditioner |
| Language | English |
Covers installation, power, usage by vulnerable groups, and child supervision.
Detailed safety measures for wiring, servicing, and handling the appliance.
Advice on air exposure, unit operation, and power management.
How to choose operation modes, set fan speed, and adjust temperature.
Instructions for controlling horizontal and vertical airflow direction.
A guide to diagnosing and resolving common operational issues.
Procedures before installation and crucial electrical safety precautions.
Detailed steps for using a vacuum pump to remove air and moisture from the system.
