To Next PageTo Next PageWhy is my Whirlpool SPIW409A2WF not cooling or heating?
Your Whirlpool Air Conditioner might not be cooling or heating properly due to several reasons. First, check if the air filter is dirty. Also, ensure that the air intakes and outlets are not blocked. Confirm that the temperature is set correctly and that all doors and windows are closed.
What to do if my Whirlpool SPIW409A2WF Air Conditioner does not run?
If your Whirlpool Air Conditioner doesn't run, check a few things. First, see if the protection device or fuse has blown. If not, wait three minutes and try again, as the protection device may be preventing the unit from starting. Also, check the remote control batteries and ensure the unit is properly plugged in.
How to fix ineffective control of Whirlpool SPIW409A2WF Air Conditioner?
If you are experiencing ineffective control with your Whirlpool Air Conditioner, it might be due to strong interference such as excessive static electricity discharge or power supply voltage abnormality. Unplug the unit from the power supply and plug it back in after 2-3 seconds.
Why does my Whirlpool SPIW409A2WF have a peculiar smell?
A peculiar smell from your Whirlpool Air Conditioner may originate from external sources like furniture or cigarette smoke. The unit might be drawing these odors in and expelling them with the air.
Why does mist spray from the Whirlpool SPIW409A2WF Air Conditioner outlet?
If you notice mist spraying from the outlet of your Whirlpool Air Conditioner, especially in a room with low temperature, this is normal. It's due to the cool air discharged from the indoor unit during COOLING or DRY operation mode.
What is the sound of running water in my Whirlpool SPIW409A2WF Air Conditioner?
If you hear a sound of running water in your Whirlpool Air Conditioner, it is normal. This is caused by the flow of refrigerant within the system. It can also be a defrosting sound when the unit is in heating mode.
Why does my Whirlpool Air Conditioner not operate immediately?
When changing modes during operation, your Whirlpool Air Conditioner will have a 3-minute delay.
What causes a cracking sound in my Whirlpool SPIW409A2WF?
A cracking sound from your Whirlpool Air Conditioner may be generated by the expansion or contraction of the front panel due to temperature changes.
What does it mean if the running indicator flashes but the indoor fan stops on my Whirlpool SPIW409A2WF?
If the running indicator flashes but the indoor fan stops on your Whirlpool Air Conditioner, the unit is shifting from heating mode to defrost. The indicator will light off and then return to heating mode.
Defines appropriate and inappropriate usage scenarios for the appliance, including household and similar applications.
Covers handling, installation by qualified technicians, and safety precautions during setup.
Details power supply requirements, wiring, earthing, and safety standards for electrical connections.
Provides essential guidelines for safe cleaning and routine maintenance procedures.
Instructions for responsible disposal of packaging materials in compliance with local regulations.
Guidelines for environmentally sound disposal of the appliance as WEEE.
States compliance with regulations and details the refrigerant type used.
Identifies and labels the various components of the indoor air conditioning unit.
Identifies and labels the various components of the outdoor air conditioning unit.
Explains the function and meaning of various indicators on the appliance's display.
Instructions for battery installation, basic operation, and remote control presetting.
Detailed explanation of each button's function on the remote control.
Visual guide to understanding the various symbols displayed on the remote control.
Describes how to activate and lock/unlock the remote control's functions.
Details operational limits and built-in protection mechanisms for various modes like heating and cooling.
Step-by-step guide for cleaning the front panel of the indoor unit.
Instructions on how to remove, clean, and refit the air filter for optimal performance.
How to operate the unit manually using the indoor unit's button when the remote is unavailable.
Information on how to set and cancel the auto-restart feature of the appliance.
Guidance on proper recycling of used batteries to protect natural resources.
Visual representation of required clearances and placement for indoor and outdoor units.
Details on power cord types and cross-sectional areas for different unit capacities.
Steps to take to resolve issues yourself before contacting customer support.
Essential details needed when contacting customer service for fault diagnosis.
Defines appropriate and inappropriate usage scenarios for the appliance, including household and similar applications.
Covers handling, installation by qualified technicians, and safety precautions during setup.
Details power supply requirements, wiring, earthing, and safety standards for electrical connections.
Provides essential guidelines for safe cleaning and routine maintenance procedures.
Instructions for responsible disposal of packaging materials in compliance with local regulations.
Guidelines for environmentally sound disposal of the appliance as WEEE.
States compliance with regulations and details the refrigerant type used.
Identifies and labels the various components of the indoor air conditioning unit.
Identifies and labels the various components of the outdoor air conditioning unit.
Explains the function and meaning of various indicators on the appliance's display.
Instructions for battery installation, basic operation, and remote control presetting.
Detailed explanation of each button's function on the remote control.
Visual guide to understanding the various symbols displayed on the remote control.
Describes how to activate and lock/unlock the remote control's functions.
Details operational limits and built-in protection mechanisms for various modes like heating and cooling.
Step-by-step guide for cleaning the front panel of the indoor unit.
Instructions on how to remove, clean, and refit the air filter for optimal performance.
How to operate the unit manually using the indoor unit's button when the remote is unavailable.
Information on how to set and cancel the auto-restart feature of the appliance.
Guidance on proper recycling of used batteries to protect natural resources.
Visual representation of required clearances and placement for indoor and outdoor units.
Details on power cord types and cross-sectional areas for different unit capacities.
Steps to take to resolve issues yourself before contacting customer support.
Essential details needed when contacting customer service for fault diagnosis.
General| Type | Split AC |
|---|---|
| Star Rating | 3 Star |
| Energy Efficiency Class Cooling | A |
| Compressor Type | Rotary |
| Refrigerant | R32 |
| Wi-Fi | Yes |
| Operating Voltage | 230V |
| Operating Frequency | 50Hz |
| Fan Speed Settings | 3 |
| Cooling Capacity BTU | 12000 BTU/h |
| Warranty | 1 Year |
