Pre-Wash cycle
The Pre-Wash cycle features a brief period of
high speed agitation to help remove.heavy
soils and stains that need pretreatment.
l
Use warm water for prewashing stained
laundry. (Hot water can set stains.) See
pages 22-24 for stain removal information.
. After the Pm-Wash cycle ends, add
detergent and set a new wash cycle.
Super Wash cycle
Super Wash automatically prewashes the
laundry and advances into the Regular wash
cycle. (The washer does not need to be
reset after the Super Wash cycle.) Use this
cycle when washing heavily soiled loads that
need maximum soil removal.
l
For proper cleaning, use double the
amount of detergent recommended for a
wash cycle.
NOTE:
The machine pauses during Super
Wash. This is normal for washer operation.
Prewash cycle
Super Wash cycle
Using rinse and spin
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may want an extra rinse and spin.
1. Push Cycle Control Knob in and turn
clockwise to RINSE, as illustrated.
2. Pull Cycle Control Knob out. The washer
fills to selected load size, agitates, drains,
and spins.
Using drain and spin
A drain and spin may help shorten drying
times for some heavy fabrics or special-care
items by removing excess water.
1. Push Cycle Control Knob in and turn
clockwise to SPIN, as illustrated.
2. Pull Cycle Control Knob out. The washer
drains, and then spins.
10
To Next Page
Loading...
