To Next PageTo Next Page
Need help?Do you have a question about the Whirlpool W11364660B and is the answer not in the manual?
General| Brand | Whirlpool |
|---|---|
| Model Number | W11364660B |
| Type | Electric |
| Appliance Category | Dryer |
| Color | White |
| Dryer Venting | Vented |
| Dryer Capacity | 7.4 cu. ft. |
| Number of Dryer Temperature Settings | 5 |
| Voltage | 240 V |
| Amperage | 30 A |
| Frequency | 60 Hz |
| Energy Star Certified | No |
| Dryer Width | 27 in. |
| Drying Cycles | Normal, Delicates, Heavy Duty, Quick Dry, Bulky Items |
| Control Type | Touch |
Key safety guidelines to prevent fire, electric shock, and injury during appliance use.
FCC rules for device operation, including interference and unauthorized modifications.
IC rules for device operation, including interference and antenna gain.
Instructions for cleaning the dryer area, including a warning about flammable materials.
Guide for cleaning the dryer drum using detergent or microfiber cloth.
How to remove lint from the dryer cabinet and exhaust vent.
Steps for cleaning the lint screen, including regular and as-needed cleaning methods.
Procedure for replacing the dryer's interior drum light bulb.
Importance of proper venting for dryer performance and energy savings.
Key practices like cleaning the lint screen and using proper vent materials.
Lists required tools and parts for dryer installation.
Guidelines on dryer placement, safety, and space needs.
Specific measurements for spacing around the dryer for proper installation and ventilation.
Detailed instructions for connecting the dryer to the electrical supply, including wire types.
How to use a UL-listed power supply cord kit for dryer connection.
Instructions for direct electrical wiring, including cable types and grounding.
Guidelines for properly grounding the dryer for safety.
Step-by-step guide for attaching and adjusting the dryer's leveling legs.
Detailed guide for connecting the dryer to the U.S. electrical supply, covering cord and direct wire options.
Guidance on selecting the correct electrical connection type (cord or direct wire).
Steps for connecting the power supply cord, including strain relief.
Instructions for making a 4-wire power supply connection.
Instructions for making a 3-wire power supply connection.
Steps for direct electrical wiring, including strain relief.
Steps for connecting a 4-wire cable for direct electrical wiring.
Steps for connecting a 3-wire cable for direct electrical wiring.
Instructions for an optional 3-wire power supply cord connection, with electrician verification.
Guidelines for using existing or new home vent systems, including cleaning and material types.
Recommendations for exhaust hood types and placement to prevent pest entry.
Advice on using 45° elbows over 90° elbows for better airflow.
Instructions on using clamps to seal vent joints and avoid lint traps.
Typical dryer venting configurations from the rear, side, or bottom.
Alternative venting methods like close-clearance and over-the-top installations.
Requirements for venting dryers in mobile homes, including termination and path determination.
How to use the vent system chart to calculate optimal vent length and elbow count.
Steps to prepare for connecting water inlet hoses, including washer replacement.
Connecting the short hose and Y-connector to the cold water faucet.
How to properly tighten hose couplings to prevent leaks.
Connecting the dryer vent to the exhaust outlet and ensuring proper fit.
Moving the dryer into its final position and removing packaging supports.
Instructions for leveling the dryer for optimal performance, especially for sensor cycles.
Fine-tuning the leveling legs to ensure the dryer is stable and does not rock.
How to install or remove the dryer's decorative base trim.
Steps to diagnose and resolve issues when the dryer fails to start.
Steps to diagnose and resolve issues when the dryer is not producing heat.
