EasyManua.ls Logo

Whirlpool WDT730PAHZ - User Manual

Whirlpool WDT730PAHZ
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
User Guide
Dishwasher
LEARN MORE
In an effort to conserve natural resources, this dishwasher includes a condensed User Guide. A complete User
Instructions can be downloaded at www.whirlpool.com/manuals.
For future reference, please make a note of your product model and serial numbers. You can find them on the label
located near the door on the right-hand or left-hand side of the dishwasher interior.
Model Number________________________________ Serial Number______________________________________
Register your dishwasher at www.whirlpool.com. In Canada, register your dishwasher at www.whirlpool.ca.
Para una version de estas instrucciones en español, visite www.whirlpool.com.
You can be killed or seriously injured if you don’t immediately follow instructions.
You can be killed or seriously injured if you don’t follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the
instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGERor “WARNING.
These words mean:
DANGER
WARNING
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When using the dishwasher, follow basic precautions, including the following:
SAVE THESE INSTRUCTIONS
Read all instructions before using the dishwasher.
Use the dishwasher only for its intended function.
Use only detergents or rinse agents recommended for use in a
dishwasher, and keep them out of the reach of children.
When loading items to be washed:
1) Locate sharp items so that they are not likely to damage the
door seal; and
2) Load sharp knives with the handles up to reduce the risk of
cut-type injuries.
Do not wash plastic items unless they are marked “dishwasher
safe” or the equivalent. For plastic items not so marked, check
the manufacturer's recommendations.
Do not touch the heating element during or immediately after use.
Do not operate the dishwasher unless all enclosure panels are
properly in place.
Do not tamper with controls.
Do not abuse, sit on, or stand on the door, lid, or dish racks of
the dishwasher.
To reduce the risk of injury, do not allow children to play in or
on the dishwasher.
Under certain conditions, hydrogen gas may be produced in a
hot water system that has not been used for two weeks or
more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system
has not been used for such a period, before using the
dishwasher turn on all hot water faucets and let the water flow
from each for several minutes. This will release any
accumulated hydrogen gas. As the gas is flammable, do not
smoke or use an open flame during this time.
Remove the door or lid to the washing compartment
when removing an old dishwasher from service or
discarding it.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.
W10917320A

Questions and Answers

  • S
    Shelby WarnerJul 28, 2025
    Why does my Whirlpool WDT730PAHZ not run or stop during a cycle?
    • J
      Jennifer MillerJul 28, 2025
      There are several reasons why your Whirlpool Dishwasher might not be running or may stop mid-cycle. It is normal for some cycles to pause briefly during the main wash. Ensure the door is tightly closed and latched, and that you've selected the correct cycle. Verify that the dishwasher has power and that the water shut-off valve (if installed) is turned on. Check your household fuse or circuit breaker, replacing the fuse or resetting the breaker if necessary. If the motor has stopped due to an overload, it should reset automatically within a few minutes.
  • P
    Philip BeckerAug 2, 2025
    Why are my dishes not drying completely in my Whirlpool WDT730PAHZ?
    • M
      Michelle PhamAug 2, 2025
      If your dishes aren't drying completely in your Whirlpool Dishwasher, there are a few potential reasons. Plastics and items with nonstick surfaces are difficult to dry, so using rinse aid along with the Heat Dry option is recommended. Proper loading of items can also affect drying. Try to unload the bottom rack first. For improved results with plastics, place these items on the more slanted side of the rack.
  • E
    Elizabeth FarrellAug 7, 2025
    What to do if Whirlpool WDT730PAHZ Dishwasher does not clean completely?
    • M
      Mark CampbellAug 7, 2025
      If your Whirlpool Dishwasher isn't cleaning dishes completely, several factors could be responsible. Ensure the dishwasher is loaded correctly. Check the filter to ensure it is properly installed and clean it if needed. Select the appropriate cycle for the soil level on your dishes; the Sensor or Heavy wash cycles are suitable for tougher loads. Verify that the incoming water temperature is at least 120°F (49°C), and use the correct amount of fresh detergent, using more for heavily soiled loads or hard water. Scrape food from dishes before loading, but do not prerinse. Also, if foam or suds are detected by the dishwasher sensing system, the dishwasher may not operate properly or may not flil with water.
  • G
    ginabrockAug 12, 2025
    What causes spotting or filming on dishes in my Whirlpool Dishwasher?
    • W
      wendy53Aug 12, 2025
      Spotting or filming on dishes in your Whirlpool Dishwasher can be due to several factors. Using liquid rinse aid is necessary for drying and reducing spots. Ensure you're using the correct amount of detergent. Cloudiness might be due to hard water; confirm this by soaking the item in white vinegar for 5 minutes. The incoming water temperature should be set to 120°F (49°C). You can also try using the Hi-Temp Wash or Sani Rinse options. To remove spotting, run a vinegar rinse through the dishwasher by placing 2 cups (500 mL) of white vinegar in a glass measuring cup on the lower rack and running a Normal cycle with the Heat Dry option turned off. Be sure to wash and rinse the affected dishware and load into dishwasher, also remove all silverware and metal items.
  • V
    virginia61Aug 17, 2025
    How to fix a Whirlpool WDT730PAHZ Dishwasher that does not drain?
    • J
      Jason AguirreAug 17, 2025
      If your Whirlpool Dishwasher isn't draining, first ensure that the cycle has been fully completed (the Clean light is on). If not, resume the cycle by closing the door and pressing Start/Resume. If the dishwasher is connected to a food waste disposer, make sure the knockout plug has been removed from the disposer inlet. Inspect the drain hose for any kinks. Check for any food obstructions in the drain or disposer. Also, check your house fuse or circuit breaker.
  • E
    Emily Caldwell DDSAug 22, 2025
    What to do if the Clean indicator is flashing on my Whirlpool Dishwasher?
    • T
      thompsonnicoleAug 22, 2025
      If the Clean indicator is flashing on your Whirlpool Dishwasher, several factors could be the cause. Ensure the overflow protection float is able to move up and down freely; press down to release it. Verify that the water supply is turned on to the dishwasher and check for suds inside. Suds can result from using the wrong type of detergent (like laundry detergent or hand soap), forgetting to replace the rinse aid dispenser cap after filling, or using too much dishwasher detergent.

Summary

Safety Warnings and Symbols

Understanding Safety Alerts

Explanation of safety alert symbols, DANGER, and WARNING statements for safe operation.

IMPORTANT SAFETY INSTRUCTIONS

Basic Dishwasher Safety Precautions

Essential safety guidelines for using the dishwasher, including loading and detergent use.

GROUNDING INSTRUCTIONS

Electrical Grounding Requirements

Essential information on proper grounding for safe electrical operation of the dishwasher.

OPERATING YOUR DISHWASHER

Adding Dishes During Cycle

Procedure for adding dishes after a cycle has started and restarting it.

Loading the Dishwasher

Guidelines for properly loading dishes, silverware, and plastics for best cleaning.

Adding Detergent

Instructions on selecting and adding detergent for optimal wash results.

CYCLE GUIDE

OPERATING STEPS

Add Rinse Aid

How to add rinse aid and adjust the dispenser for optimal drying.

Select Cycle and Options

Choosing the appropriate cycle and customizing with available options.

Start, Resume, and Monitor Cycle

Steps to start, resume, and follow the progress of the dishwasher cycle.

Dishwasher Options

Control Panel Functions

TROUBLESHOOTING

TROUBLESHOOTING Continued

MAJOR APPLIANCE LIMITED WARRANTY

Warranty Coverage Details

Details of the one-year limited warranty coverage for parts and labor.

Warranty Exclusions

Exclusions from warranty coverage, including installation and cosmetic damage.

Whirlpool WDT730PAHZ Specifications

General IconGeneral
Stylebuilt in
Colorstainless steel
Load Capacity15 place settings
Number of Cycles5
Cycle Selections5 (sensor wash, heavy, normal, 1-hour wash, soak & clean)
Number of Options5
Options/Settings5 (1-24 hour delay, control lock, sani rinse®, hi temp wash, heated dry)
Drying Typeheated & vented
Noise level51 db
Control Typedigital; manual
Delay Startyes
Number of Racks2
Spray Arms3
Water Filteryes; removable filter
Water Softenerno
Food Disposerno
Sanitize Settingsyes
Half Loadno
Wi-Fino
Voltage120 volts
Frequency60hz
Current15 or 20a; 20
Weight and Dimensions IconWeight and Dimensions
Depth24 1/2 inch
Height34 1/2 inch
Width23 7/8 inch
Net Weight55 lbs.

Videos

How to Troubleshoot E2F2 Error on Whirlpool WDT730PAHZ Dishwasher

Related product manuals