EasyManua.ls Logo

Whirlpool WDT920SADM - User Manual

Whirlpool WDT920SADM
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
W10852540A
1
LEARN MORE
In an effort to conserve natural resources, this dishwasher includes a condensed User Guide. A complete User
Instructions manual for your model can be downloaded at www.whirlpool.com/manuals.
For future reference, please make a note of your product model and serial numbers. You can find them on the label
located near the door on the right-hand or left-hand side of the dishwasher interior.
Model Number ___________________________ Serial Number _______________________________________
Register your dishwasher at www.whirlpool.com. In Canada, register your dishwasher at www.whirlpool.ca.
Para una version de estas instrucciones en español, visite www.whirlpool.com.
User Guide
Dishwasher
You can be killed or seriously injured if you don’t immediately follow instructions.
You can be killed or seriously injured if you don’t follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the
instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the w
ord “DANGER” or “WARNING.
These words mean:
DANGER
WARNING
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When using the dishwasher, follow basic precautions, including the following:
SAVE THESE INSTRUCTIONS
Read all instructions before using the dishwasher.
Use the dishwasher only for its intended function.
Use only detergents or rinse agents recommended for use in a
dishwasher, and keep them out of the reach of children.
When loading items to be washed:
1) Locate sharp items so that they are not likely to damage the
door seal; and
2) Load sharp knives with the handles up to reduce the risk of
cut-type injuries.
Do not wash plastic items unless they are marked
“dishwasher safe” or the equivalent. For plastic items not so
marked, check the manufacturer's recommendations.
Do not touch the heating element during or immediately after
use.
Do not operate the dishwasher unless all enclosure panels are
properly in place.
Do not tamper with controls.
Do not abuse, sit on, or stand on the door, lid, or dish racks of
the dishwasher.
To reduce the risk of injury, do not allow children to play in or
on the dishwasher.
Under certain conditions, hydrogen gas may be produced in a
hot water system that has not been used for two weeks or
more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system
has not been used for such a period, before using the
dishwasher turn on all hot water faucets and let the water flow
from each for several minutes. This will release any
accumulated hydrogen gas. As the gas is flammable, do not
smoke or use an open flame during this time.
Remove the door or lid to the washing compartment
when removing an old dishwasher from service or
discarding it.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.

Questions and Answers

  • B
    barbara97Jul 26, 2025
    Why is my Whirlpool WDT920SADM Dishwasher not cleaning properly?
    • J
      James MoraJul 26, 2025
      Several factors can cause a Whirlpool dishwasher to not clean completely. Ensure the dishwasher is loaded correctly and the filter is properly installed and clean. Select the appropriate cycle for the soil level; the Sensor Wash or Heavy Wash cycle are suitable for tougher loads. Verify the incoming water temperature is at least 120°F (49°C) and use the correct amount of fresh detergent; more detergent may be needed for heavier soiled loads and hard water conditions. Scrape food from dishes before loading. Suds from incorrect detergent or not replacing the rinse aid dispenser cap after filling, or using too much detergent can also cause cleaning issues.
  • L
    Lonnie MurilloJul 31, 2025
    What to do if my Whirlpool WDT920SADM does not drain?
    • A
      Andrea RobertsJul 31, 2025
      If your Whirlpool dishwasher isn't draining, first ensure the cycle has fully completed (the Clean light is on). If not, close the door and press Start/Resume to continue the cycle. If connected to a food waste disposer, confirm the knockout plug has been removed from the disposer inlet. Inspect the drain hose for kinks and check for any food obstructions in the drain or disposer. Finally, check your house fuse or circuit breaker.
  • N
    Nathan SmithAug 4, 2025
    How to prevent spotting and filming on Whirlpool WDT920SADM?
    • J
      Johnny ScottAug 4, 2025
      To reduce spotting on your dishes, liquid rinse aid is necessary for drying. Also, ensure you are using the correct amount of detergent. If cloudiness is due to hard water, try soaking the item in white vinegar for 5 minutes. Adjust the amount of detergent and rinse aid, and ensure the incoming water temperature is set at 120°F (49°C). You might also try using the High Temp and Sani Rinse options. To remove existing spotting, run a vinegar rinse through the dishwasher by washing and rinsing the affected dishware and loading it into the dishwasher. Remove all silverware and metal items, put 2 cups (500 mL) of white vinegar in a glass measuring cup in the lower rack, and run a normal cycle with the Heat Dry option turned off, using no detergent.
  • T
    Thomas LucasAug 8, 2025
    What to do if the Clean indicator is flashing on my Whirlpool WDT920SADM?
    • L
      Lauren EstradaAug 8, 2025
      If the Clean indicator is flashing on your Whirlpool dishwasher, first check that the overfill protection float can move freely. Press it down to release it. Also, make sure the water supply is turned on to the dishwasher. Check for suds inside the dishwasher, which can be caused by using the incorrect type of detergent (like laundry detergent, hand soap, or dish detergent for hand washing dishes), forgetting to replace the rinse aid dispenser cap after filling, or using too much dishwasher detergent.
  • M
    Melanie ColeAug 13, 2025
    How to improve drying in my Whirlpool Dishwasher?
    • M
      Michael NealAug 13, 2025
      If your dishes aren't drying in your Whirlpool dishwasher, remember that plastic and nonstick items are difficult to dry and may need towel drying. Use rinse aid along with the Heat Dry option for better results. Proper loading of items can also affect drying; unload the bottom rack first and place items on the more slanted side of the rack for improved drying.
  • K
    Kevin SantosAug 17, 2025
    Why does my Whirlpool Dishwasher not run or stop during cycle?
    • S
      sandyowensAug 17, 2025
      Several factors can cause your Whirlpool dishwasher to not run or stop mid-cycle. It is normal for some cycles to pause briefly during the main wash. Ensure the door is tightly closed and latched, and the correct cycle is selected. Check if there is power to the dishwasher. If a household fuse is blown or a circuit breaker has tripped, replace the fuse or reset the breaker. If the issue continues, consult an electrician. If the motor stopped due to an overload, it should automatically reset itself within a few minutes. Finally, check that the water shut-off valve (if installed) is turned on.
  • R
    Robert JohnsonAug 21, 2025
    Why is my Whirlpool Dishwasher making noise?
    • N
      Nicole ReedAug 21, 2025
      Various sounds can come from your Whirlpool dishwasher. Surging sounds during draining and hissing from the water valve are normal. A snap sound when the detergent dispenser opens or when the door is opened at the end of the cycle is also normal. Improper installation can affect noise levels. Ensure the filters are properly installed. A thumping sound might occur if items extend beyond the racks and interfere with the wash arms; readjust the dishware and resume the cycle.

Summary

Safety Information

General Safety Instructions

Provides essential precautions for safe dishwasher operation and important warnings.

California Proposition 65 Warnings

Notifies about chemicals in the product known to cause cancer or reproductive harm.

Grounding and Installation

Grounding Instructions

Details the requirements for grounding cord-connected and permanently connected dishwashers.

Key Usage Tips

Filtration System and Maintenance

Explains the dishwasher's filter system, its maintenance, and cleaning recommendations.

Drying and Rinse Aid

Highlights the importance of rinse aid for optimal drying performance.

Energy Efficiency

Explains how cycle times and water/energy usage are managed for efficiency.

Adding Dishes During Cycle

Instructions on how to press START/RESUME after adding a dish during an ongoing cycle.

Operating Your Dishwasher

Prepare and Load the Dishwasher

Guidance on preparing dishes, loading racks, and preventing noise during operation.

Check Spray Arms

Ensures spray arms are not blocked by loaded items for effective cleaning.

Add Detergent

Instructions on using premeasured detergents and automatic dishwasher detergent.

Add Rinse Aid

Explains how to add rinse aid and adjust the dispenser for better drying.

Select a Cycle

Information on choosing the appropriate wash cycle based on soil level and needs.

Select Options

Details how to customize cycles with various options for improved performance.

Follow Cycle Progress

Explains how to monitor the dishwasher's cycle status via the display.

Start or Resume Cycle

Instructions for initiating a wash cycle and resuming after interruptions.

Dishwasher Options and Controls

Dishwasher Cycle Options

Details features like Delay, Sani Rinse, Hi Temp Wash, Light Dry, and Heat Dry.

Control Lock Feature

Explains how to activate and deactivate the control lock to prevent unintended use.

Cycle Control Buttons

Purpose and operation of Start/Resume, Cancel/Drain buttons.

Dishwasher Care and Troubleshooting

Dishwasher Cleaning

Guidance on cleaning the exterior and interior, including hard water/filming removal.

Troubleshooting Common Issues

Provides solutions for problems like dishwasher not running, clean indicator flashing, or poor drying.

Troubleshooting Noises and Cleaning

Addresses common noises, spotting/filming, and issues with dishes not cleaning completely.

Troubleshooting Drainage

Solutions for the dishwasher not draining properly, including checks for kinks or obstructions.

Warranty Information

Major Appliance Limited Warranty

Details the one-year limited warranty coverage and what is not covered.

Service and Support

Instructions on how to obtain warranty service and contact the customer experience center.

Warranty Disclaimers

Clarifies implied warranties and limitations on remedies or consequential damages.

Whirlpool WDT920SADM Specifications

General IconGeneral
Stylebuilt-in dishwashers
Colorstainless steel
Control Typeelectronic
Delay Startyes
Child Lockyes
Load Sensoryes
Cycle Signalno
Water Filteryes
Food Disposerno
Sanitize Settingsno
Annual Energy Consumption270 kilowatt hours
Voltage120 volts
Current15 amperes
Weight and Dimensions IconWeight and Dimensions
Depth24.5 inches

Related product manuals