To Next PageTo Next Page
Need help?Do you have a question about the Whirlpool WDT710PAHZ and is the answer not in the manual?
General| Style | built in |
|---|---|
| Color | stainless steel |
| Load Capacity | 13 place settings |
| Number of Cycles | 5 |
| Cycle Selections | 5 (sensor wash; heavy; normal; 1-hour wash; soak & clean) |
| Options/Settings | 5 (1-24 hour delay; control lock; hi temp wash; heated dry; sani rinse®) |
| Drying Type | heated |
| Noise level | 51 dba |
| Control Type | touchpad; push button |
| Delay Start | yes |
| Number of Racks | 2 |
| Spray Arms | 2 |
| Water Filter | yes; removable filter |
| Water Softener | no |
| Food Disposer | no |
| Wi-Fi | no |
| Voltage | 120 volts |
| Frequency | 60hz |
| Current | 15a |
Weight and Dimensions| Depth | 24 1/2 inch |
|---|---|
| Height | 34 1/2 inch |
| Width | 23 7/8 inch |
Basic safety rules for operating the dishwasher, including loading and handling.
Details on proper grounding for cord-connected and permanently connected dishwashers.
Warning about potential tip-over hazards and precautions to prevent injury.
Information regarding chemicals known to cause cancer or reproductive harm.
Highlights water and energy savings, optical sensor, and longer cycle times.
Explains the role of rinse aid for drying and detergent impact on cleaning.
Describes the triple filtration system and its maintenance requirements.
Visual guide to major parts including spray arms, dispensers, and racks.
Details on the top and bottom racks, cup shelves, and silverware basket.
Instructions for removing food soil and loading dishes for optimal spray.
Guidance on adding detergent and rinse aid to the correct compartments.
How to choose wash cycles and customize with available options.
Procedure to start or resume a cycle, including door closure timing.
Instructions for unloading dishes and cleaning the filter after use.
Tips for loading upper and lower racks to ensure effective cleaning and prevent blocking.
Instructions on selecting detergent type, amount based on water hardness, and dispenser use.
How to fill the rinse aid dispenser and adjust settings for water hardness.
Guidance on choosing cycles and customizing with options for optimal cleaning.
Steps to start, resume, or add items to a cycle, including door closure requirements.
Details on Sensor, Heavy, Normal, 1 Hr Wash, Soak & Clean cycles, including time and water usage.
Description of Delay, Sani Rinse, Heat Dry, Hi Temp Wash, and Control Lock options.
Explanation of control buttons, cycle status lights, and indicators.
Information on the AnyWare silverware basket and removable top rack.
Recommended intervals for cleaning filters based on load frequency and water hardness.
Step-by-step guide for removing and properly reinstalling the upper and lower filters.
Detailed instructions for cleaning filters, including using brushes and reinstallation.
Tips for cleaning the dishwasher exterior and interior, and removing residue.
Guidance on protecting the dishwasher from damage during extended periods of non-use.
Solutions for when the dishwasher fails to start or operate.
Troubleshooting if detergent remains in the dispenser or tub.
Addressing extended cycle times and poor drying performance.
Steps to resolve issues where the dishwasher does not fill with water.
Solutions for water remaining in the tub or the dishwasher not draining.
Addressing white residue from hard water and common odor causes.
Tips for improving cleaning results and ensuring proper soil removal.
Resolving issues with sanitization and preventing damage to dishes.
Interpreting blinking lights and troubleshooting cycle interruptions.
Addressing cloudy dishware, spotting, and permanent etching on glassware.
Tips for preventing leaks and understanding tub discoloration causes.
Explains what is covered under the one-year limited warranty for parts and labor.
Lists specific conditions and parts not covered by the warranty.
Contact information and procedures for requesting warranty service.
Legal statement regarding implied warranties and their limitations.
