26
Product Features
Power On
• Unpack all the packaging materials including the base and adhesive tape.
• Check the accessories
and documents inside the package according to packing list, contact the
shop from which you purchased if anything is missing.
• Put refrigerator in an appropriate place. If it is not stable, you may x the problem by adjusting the
adjustable feet.
• It is suggested to clean the refrigerator before usage.
• After installation and adjustment, wait for at least 6 hours before connecting the appliance to
ensure the refrigerator can function normally.
• For first use, It is recommended to set the fridge compartment temperature to "3" and the freezer
compartment temperature to "2". Put all the accessories in place according to the component
diagram.
• Connect the refrigerator and close the doors, then check if the compressor works normally, and
also check if the two sides of the refrigerator become heat (being heated is a normal
phenomenon).
• The freezer should obviously cool down after the refrigerator works for half an hour. Put foods in
the refrigerator after it starts for 2-3 hours (4-6 hours is needed if the room temperature is high in
summer).
When y
ou set a temperature, you set an average temperature for the whole
refrigerator cabinet. Temperatures may different from different location of fridge
compartment, depending on how much food you store and where you store and
where you place them. Ambient temperature may also affect the actual temperature
inside the appliance.
NOTICE
Using your
Appliance
To Next Page
Loading...
