Whirlpool WFC 3C34 P User Manual (English)

Questions and Answers:

M
Mackenzie WatsonAug 12, 2025
What to do if Whirlpool Dishwasher won't start or respond to commands?
- T
  tbrooksAug 12, 2025
  If your Whirlpool dishwasher isn't starting or responding, here are a few things to check: * Ensure the appliance is properly plugged into the socket. * If there was a power outage, press the START/Pause button to resume the cycle. * Make sure the dishwasher door is fully closed until you hear a click. * If the cycle was interrupted by opening the door for more than 4 seconds, close the door and press the START/Pause button. * If the display shows F9 or F12 and the On/Off and START/Pause LEDs are blinking, switch the appliance off and on again after one minute. If the problem continues, unplug the appliance for one minute, then plug it back in.
M
Misty FloydAug 16, 2025
Why is my Whirlpool WFC 3C34 P Dishwasher not draining?
- A
  Alison HarrisAug 16, 2025
  If your Whirlpool dishwasher isn't draining, it could be due to several reasons: * The wash cycle may not have finished yet, so wait until it completes. * The drain hose might be bent; ensure it is not. * The sink drain pipe could be blocked; try cleaning it. * The filter may be clogged with food residues; clean the filter.
N
nancyosborneAug 19, 2025
What to do if Whirlpool Dishwasher does not fill the water and shows F6 error?
- A
  Annette BuckAug 19, 2025
  If your Whirlpool dishwasher isn't filling with water and displays error code F6, here are some possible solutions: * Ensure that there is water in the water supply and that the tap is open. * Check that the inlet hose is not bent. * Inspect the sieve in the water inlet hose for clogs and clean it if necessary. After checking and cleaning, turn the dishwasher off and on, then restart the program.
R
Roger CarlsonAug 23, 2025
Why are my dishes not clean in my Whirlpool WFC 3C34 P?
- L
  Lisa EsparzaAug 23, 2025
  If your dishes aren't getting clean in your Whirlpool dishwasher, consider the following: * Ensure the crockery is arranged correctly so that the spray arms can rotate freely. * Select an appropriate wash cycle. * Avoid excessive foam by using the correct amount and type of detergent. * Make sure the rinse aid compartment cap is properly shut. * Clean the filter assembly if it's soiled or clogged. * Fill the salt reservoir if it's empty.
S
sullivankeithAug 27, 2025
How to turn off the salt indicator on my Whirlpool WFC 3C34 P?
- S
  sanderschristopherAug 27, 2025
  If the salt indicator is lit on your Whirlpool dishwasher, it may be because the salt reservoir is empty. Refill it with salt. Note that the salt indicator may remain lit for several wash cycles after refilling. Also, adjust the water hardness setting.
T
Tricia BarreraAug 31, 2025
How do I turn off the rinse aid indicator on my Whirlpool Dishwasher?
- M
  Micheal CollinsAug 31, 2025
  If the rinse aid indicator is lit on your Whirlpool dishwasher, it means the rinse aid dispenser is empty. Refill the dispenser with rinse aid. Keep in mind that the indicator may remain lit for several wash cycles after refilling.
C
Christina FinleySep 3, 2025
Why is my Whirlpool Dishwasher making excessive noise?
- M
  Michael BarnesSep 4, 2025
  Excessive noise from your Whirlpool dishwasher can be caused by: * Dishes rattling against each other; make sure to position the crockery correctly. * Too much foam being produced; this could be due to incorrect detergent dosage or unsuitable detergent. Restart the dishwasher by pressing the DRAIN button and run a new program without detergent.
J
Jennifer WongSep 7, 2025
What to do if Whirlpool WFC 3C34 P finishes the cycle prematurely and shows F15 error?
- N
  Nancy LopezSep 7, 2025
  If your Whirlpool dishwasher is ending its cycle early and showing error F15, consider these potential causes: * The drain hose may be positioned too low, or there might be siphoning into the home sewage system. Check that the end of the drain hose is at the correct height. Also, check for siphoning and install an air admittance valve if needed. * There might be air in the water supply. Inspect the water supply for leaks or other issues that could be introducing air.

Whirlpool WFC 3C34 P Specifications

General

Brand	Whirlpool
Model	WFC 3C34 P
Category	Dishwasher
Language	English

Summary

Product Description

Appliance

Diagram illustrating the main parts of the dishwasher.

Control Panel

Overview of the dishwasher's control panel buttons and indicators.

First Time Use

Advice Regarding the First Time Use

Initial setup instructions after installation, including rack preparation.

Filling the Salt Reservoir

Guide on how to fill the salt reservoir to prevent limescale.

Setting the Water Hardness

Instructions on adjusting water hardness for optimal softener performance.

Filling the Rinse Aid Dispenser

Procedure for filling the rinse aid dispenser for better drying.

Adjusting the Dosage of Rinse Aid

How to adjust rinse aid quantity for desired drying results.

Filling the Detergent Dispenser

Instructions for filling the detergent dispenser correctly.

Programs Description

1 ECO

Description of the Eco program, focusing on energy and water efficiency.

2 6th SENSE®

Explanation of the 6th Sense program for auto-adjusting wash based on soiling.

3 INTENSIVE

Recommended program for heavily soiled dishes, like pots and pans.

4 FAST WASH&DRY

Description of the everyday cycle for quick cleaning and drying.

5 CRYSTALS

Program for delicate items like glassware, sensitive to high temperatures.

6 RAPID 30′

Program for half loads of lightly soiled dishes without a drying phase.

7 SILENT

Program suitable for night-time operation, ensuring optimal cleaning with low noise.

8 PRE-WASH

Program to refresh dishes planned for later washing, without detergent.

Options and Functions

Multi Multizone

Function to wash only specific racks (upper or lower) to save resources.

Keylock

Activates child lock on the control panel, except for the ON/OFF button.

Water Tap Closed – Alarm

Indicates an issue with water supply or a closed tap.

Power Clean®

Option for intensive washing in the lower rack, ideal for pots and casseroles.

Tablet

Optimizes performance for combined detergent tablets (rinse aid, salt, detergent).

Delay

Allows to set a delayed start time for the program, from 0:30 to 24 hours.

Drain Out

Function to stop and cancel an active cycle, draining water from the dishwasher.

NaturalDry

Automatic door opening system for enhanced drying efficiency.

Loading the Racks

Upper Rack

Guidance on loading delicate and light items like glasses and cups.

Lower Rack

Instructions for loading pots, pans, plates, and cutlery.

Adjusting the Height of the Upper Rack

How to adjust the upper rack height for optimal loading.

Cutlery Basket

Placement instructions for cutlery, including safe handling of knives.

Foldable Flaps with Adjustable Position

Information on foldable flaps for arranging items like wine glasses.

Power Clean®

Explanation of the Power Clean function for intensive cleaning of heavily soiled items.

Daily Use

Check Water Connection

Ensures the appliance is connected to the water supply and tap is open.

Switch On the Dishwasher

How to turn on the dishwasher using the ON/OFF button.

Load the Racks

Reference to the section on loading the dishwasher racks properly.

Filling the Detergent Dispenser

Guide on how to fill the detergent dispenser.

Choose the Program and Customise the Cycle

Selecting programs and options based on crockery type and soiling.

Start

How to start the wash cycle using the START/PAUSE button.

End of Wash Cycle

Indication of cycle completion and steps after finishing.

Advice and Tips

Tips

General advice on loading crockery and ensuring optimal wash results.

Unsuitable Crockery

List of items not recommended for dishwasher use due to material or decoration.

Damage to Glass and Crockery

Precautions to prevent damage to glassware and crockery during washing.

Tips on Energy Saving

Recommendations for efficient energy and water usage.

Hygiene

Advice on maintaining appliance hygiene and preventing odours.

Care and Maintenance

Cleaning the Filter Assembly

Instructions for regular cleaning of the dishwasher's filter system.

Cleaning the Spray Arms

Guide on cleaning the spray arms to ensure water spray is not blocked.

Water Softening System

Explanation of the automatic water softening system and salt regeneration.

Cleaning the Water Inlet Hose

How to clean the water inlet hose, especially if it's new or unused.

Troubleshooting

Related product manuals

Whirlpool WFC 3C34 P X

Whirlpool WFC 3C42 P X

24 pages

Whirlpool WFC 3C22 P X

8 pages

Whirlpool WFC 3C33 PF

72 pages

Whirlpool WFC 3C26 F X

8 pages

Whirlpool WFC 3C26 PF X

80 pages

Whirlpool WFC 3B19

24 pages

Whirlpool WIC 3C34 PFE S

32 pages

Whirlpool WFW5620HW

15 pages

Whirlpool WFC 3C34 P User Manual

Table of Contents

Questions and Answers:

Whirlpool WFC 3C34 P Specifications

Summary

Product Description

Appliance

Control Panel

First Time Use

Advice Regarding the First Time Use

Filling the Salt Reservoir

Setting the Water Hardness

Filling the Rinse Aid Dispenser

Adjusting the Dosage of Rinse Aid

Filling the Detergent Dispenser

Programs Description

1 ECO

2 6th SENSE®

3 INTENSIVE

4 FAST WASH&DRY

5 CRYSTALS

6 RAPID 30′

7 SILENT

8 PRE-WASH

Options and Functions

Multi Multizone

Keylock

Water Tap Closed – Alarm

Power Clean®

Tablet

Delay

Drain Out

NaturalDry

Loading the Racks

Upper Rack

Lower Rack

Adjusting the Height of the Upper Rack

Cutlery Basket

Foldable Flaps with Adjustable Position

Power Clean®

Daily Use

Check Water Connection

Switch On the Dishwasher

Load the Racks

Filling the Detergent Dispenser

Choose the Program and Customise the Cycle

Start

End of Wash Cycle

Advice and Tips

Tips

Unsuitable Crockery

Damage to Glass and Crockery

Tips on Energy Saving

Hygiene

Care and Maintenance

Cleaning the Filter Assembly

Cleaning the Spray Arms

Water Softening System

Cleaning the Water Inlet Hose

Troubleshooting

Related product manuals