To Next PageTo Next PageWhat to do if my Whirlpool WFC 3C26 F X Dishwasher won’t start?
First, ensure the dishwasher is properly plugged into the socket. If there was a power outage, the dishwasher will start automatically when the power returns. Also, make sure the dishwasher door is fully closed until you hear a 'click'. If none of these work, try switching the appliance off and on again after about a minute, then reset the program.
Why won't my Whirlpool Dishwasher drain?
The wash cycle may not be complete, so wait until it finishes. Another reason could be a bent drain hose. Also, the sink drain pipe might be blocked, so try cleaning it. Finally, the filter could be clogged with food; in this case, clean the filter.
Why are my dishes not clean in my Whirlpool WFC 3C26 F X?
Several factors can cause this. Ensure the crockery is arranged correctly so the spray arms can rotate freely. Select the appropriate wash cycle for your load. Also, make sure that the cap on the rinse aid compartment is closed correctly. The filter may be soiled or clogged, so clean the filter assembly. Finally, the salt reservoir may need to be filled.
How to reduce excessive noise in Whirlpool WFC 3C26 F X?
Excessive noise can occur if dishes are rattling against each other; make sure to position the crockery correctly. Also, an excessive amount of foam may have been produced because the detergent was not measured correctly or isn't suitable for dishwashers. In this case, reset the dishwasher by pressing the DRAIN button and run a new program without detergent.
General| Appliance placement | Freestanding |
|---|---|
| Drying system | Static |
| Noise level | 46 dB |
| Number of washing programs | 6 |
| Energy efficiency class | E |
| Water consumption per cycle | 9.5 L |
| Width | 60 cm |
| Depth | 60 cm |
| Height | 85 cm |
| Delay Start | Yes |
| Half Load Option | Yes |
| Number of place settings | 14 |
| Washing programs | Eco, Intensive, Normal, Quick, Glass |
Diagram illustrating the various components of the dishwasher.
Detailed explanation of the buttons and indicators on the control panel.
Important recommendations for initial setup and appliance operation.
Instructions for filling and maintaining the salt reservoir.
Guide to setting water hardness for optimal softener performance.
How to fill and adjust the rinse aid dispenser for better drying.
Procedure for filling the detergent dispenser correctly.
Standard program for efficient energy and water consumption.
Adapts to dish soiling level for optimal cleaning.
For heavily soiled crockery, pans, and saucepans.
Everyday cycle for optimal cleaning in a shorter time.
For night-time operation with low noise emission.
For lightly-soiled dishes with no dried food residues.
For delicate items sensitive to high temperatures.
To refresh crockery planned to be washed later.
Allows half loading to save water, electricity, and detergent.
Blocks the control panel to prevent accidental changes.
Increases final rinse temperature for sanitization.
Indicates when there is no inlet water or tap is closed.
Stops and cancels an active cycle, draining the water.
Optimizes program performance for combined detergents.
Allows program start to be delayed by 0:30 to 24 hours.
Automatically opens door for enhanced drying performance.
Ensures water connection and tap are open before starting.
Steps for initiating, monitoring, and concluding a wash cycle.
Guidance on properly loading dishes and filling detergent.
How to choose the most appropriate program and customize the cycle.
Advice on loading, hygiene, and unsuitable crockery.
Information on materials not safe for dishwasher use.
Proper placement of cutlery for optimal washing and drying.
How to adjust the upper rack height for different loads.
Adjusting side flaps for better crockery arrangement.
Guidelines for loading delicate and light dishes.
Instructions for loading pots, plates, and bowls.
Procedure for cleaning the three-part filter assembly.
How to clean spray arms to ensure proper water flow.
Ensuring the water inlet hose is clear of impurities.
Solutions for issues like non-starting, not draining, and noise.
Addressing problems with dishes not being clean or rattling.
Information on when and how to contact after-sales service.
