To Next PageTo Next PageWhy is the remote control not working for my Whirlpool WHAW222BW Air Conditioner?
If the remote control for your Whirlpool Air Conditioner isn't working, check if the batteries are inserted correctly, ensuring they are in the right direction. If the batteries are dead, replace them and dispose of the old ones responsibly.
Why my Whirlpool WHAW222BW will not start?
If your Whirlpool Air Conditioner won't start, check these potential causes: * Ensure the power cord is properly plugged into a grounded 3-prong outlet. * Inspect the house fuse or circuit breaker box; replace the fuse or reset the breaker if necessary. * In case of a power failure, the unit will restart automatically after power is restored, but there's a 3-minute protective delay to prevent compressor overload. * Check the power cord reset button. If it trips, press it to reset. If it won't stay engaged, stop using the air conditioner and contact a qualified technician.
What to do if my Whirlpool WHAW222BW is not cooling properly?
If your Whirlpool Air Conditioner isn't cooling properly, consider the following: * Ensure that curtains, blinds, or furniture aren't blocking the front of the unit. * Lower the thermostat temperature setting. * Clean the air filter. Refer to the “Air Conditioner Care” section for instructions. * Allow sufficient time for the room to cool down after turning on the air conditioner. * Close any open doors or windows to prevent warm air from entering. * If the cooling coils are frozen, consult “The Air Conditioner Is Freezing Up” for guidance.
Why is my Whirlpool WHAW222BW remote control not working?
If your Whirlpool Air Conditioner remote control isn't working, check if the batteries are inserted correctly, ensuring they are in the right direction. If they are, the batteries might be dead. Replace them and dispose of the old ones responsibly.
How to fix a Whirlpool WHAW222BW that is freezing up?
If your Whirlpool Air Conditioner is freezing up, it's likely due to ice blocking the airflow. Turn off the unit and allow it to thaw completely. Once the ice has melted, operate the unit on a higher fan speed. If the issue persists, contact customer service for further assistance.
Why is my Whirlpool Air Conditioner dripping water outside?
If water is dripping from the outdoor side of your Whirlpool Air Conditioner, it's likely normal during hot and humid weather. This occurs due to condensation. Do not drill a hole into the bottom of the metal base pan, as this will reduce cooling performance.
What to do if my Whirlpool WHAW222BW is dripping water inside the room?
If water is dripping inside the room from your Whirlpool Air Conditioner, it might not be properly leveled. Ensure the unit slopes slightly downward toward the outside to allow for proper drainage. Refer to the “Installation Instructions” section for guidance on leveling. Do not drill a hole into the bottom of the metal base pan, as this will reduce cooling performance.
Why does water collect in the base pan of my Whirlpool WHAW222BW Air Conditioner?
If water collects in the base pan of your Whirlpool Air Conditioner, it's normal. The moisture removed from the air gathers there and evaporates to the outside, aiding the cooling process. Do not drill a hole into the bottom of the metal base pan, as this will reduce cooling performance.
General| Type | window |
|---|---|
| Operating Area Size | 1400 square feet |
| Cooling Capacity | 22000 british thermal units |
| Cooling Settings | 3 |
| Heater | no |
| Fan Speeds | 3 |
| Fan Airflow Rate | 459 cubic feet per minute |
| Remote Control | yes |
| Smart Applications | amazon alexa |
| Timer | yes |
| Sleeping Mode | yes |
| Energy Efficiency | 10.4 |
Key safety precautions to reduce the risk of fire, electrical shock, or injury when using the air conditioner.
Details specific electrical ratings and requirements for all air conditioner models.
Specifies electrical requirements for 230V models, including voltage and amperage.
Specifies electrical requirements for 115V models, including voltage and amperage.
Provides guidelines for safely grounding the air conditioner unit.
Specifies suitable locations and conditions for window installation of the air conditioner.
Procedure for placing and securing the air conditioner unit into a window opening.
Procedure for installing the air conditioner chassis into the cabinet within the window.
Criteria and considerations for choosing an appropriate location for wall installation.
Overview of key features like Eco mode and Sleep mode for efficient operation.
Instructions on how to adjust the fan speed to Low, Med, or High settings.
Guide on using arrow buttons to increase or decrease the set temperature.
Operating the remote for energy-saving Eco and comfort-enhancing Sleep modes.
Guidance on cleaning the air filter using vacuum or washing methods.
Troubleshooting steps for when the air conditioner fails to power on.
Solutions for issues where the unit is not cooling effectively.
Steps to resolve problems with the air conditioner's cooling coils freezing.
Troubleshooting tips for a non-functional remote control.
Details the terms and conditions of the one-year limited warranty for the air conditioner.
Lists specific services and damages not covered under the warranty.
