5. Remove the bottom hinge and 3 bottom hinge screws.
6. Install the bottom hinge on the other side of the leveling legs with 3 bottom
hinge screws.
7. Install right and left leveling legs. There are two holes below the beverage center
to fit the two leveling legs.
8. Install the door.
9. Install the top hinge on the other side with 3 top hinge screws.
10. Install top cover above the top hinge and install 1 cabinet plugs on the
11. Adjust the leveling legs.
other side.
Check to make sure that
nothing inside the
is causing beverage center
the door to not close
Beverage center
Make surethatnothing
insidethebeverage center
is causing the door to not
close
Large amounts of beverage
placed in beverage center
Beverage center is on an
Beverage center is touching
Move the beverage center
Door opened too frequently
12
13
does not operate
seems too warm/
Beverage center
beverage does not
seem to cool
the wall
Consult with a qualified
electrician
Electrical Shock Hazard
Failure to follow these instructions can result in death,
fire, or electrical shock.
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
WARNING
To Next Page
Loading...
