EasyManua.ls Logo

Whirlpool WQ9 E1L - Refrigerator Door Removal and Replacement; Preparing for Door Removal; Hinge Cover and Hinge Removal

Whirlpool WQ9 E1L
300 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Remove and Replace Refrigerator Doors
NOTE: Measure the width of your door opening to see whether or not you need to remove refrigerator doors to move refrigerator into
your home. If door removal is necessary, see the following instructions.
IMPORTANT: If refrigerator was previously installed and you are moving it out of the home, turn refrigerator control off before you begin
removing the doors. Unplug refrigerator or disconnect power. Remove food and adjustable door or utility bins from doors.
Gather required tools and read all instructions before removing doors.
TOOLS NEEDED: 6 mm socket wrench, 5 mm socket wrench and #2 Phillips screwdriver.
WARNING
Electrical Shock Hazard
Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.
A
Top Left Hinge
Middle Left Hinge
Top Left Hinge Cover
Top Right Hinge Cover
A. 5 mm socket screws
A. Hinge
A. Hinge
A. Top Hinge Cover screws
B. Top Hinge Cover
A. Top Hinge Cover screws
B. Top Hinge Cover
Top Right Hinge
Middle Right Hinge
A. 5 mm socket screws
A
A
A
B
A
B
A

Table of Contents

Related product manuals