Whirlpool WSN11W - Part Name; Operating Procedure; 2. Hold the socket of Glass Tube Heater and then pull out.; 3. Hold the socket of Glass Tube Heater and then pull out.

Ref. No. : SM77-05-058-0 Printed : Nov’2005
Page : 9
11. Pull Back Grommet from Fan Motor.
12. After replacing Fan Motor, reverse the steps above.
Part Name
Glass Tube Heater.
Operating Procedure
1. Follow step 1-11 of replacing Fan Motor.
2. Hold the socket of Glass Tube Heater
and then pull out.
3. Hold the socket of Glass Tube Heater
and then pull out.
4. Use small steel stick to press at the
Recept Terminal while pull out electrical
wire.
5. Pull out electrical wire from socket. 6. Hold and lift Evaporator up 7. Remove aluminium tape that cover
electrical wire.