To Next PageTo Next PageWhy is my Whirlpool WTW4850BW making a gurgling or humming sound?
If your Whirlpool Washer is making a gurgling or humming sound, it is likely due to the washer draining water. It is normal to hear the pump making a continuous humming sound with periodic gurgling or surging as final amounts of water are removed during the Drain & Spin cycles.
Why is my Whirlpool WTW4850BW humming?
If you hear a humming sound from your Whirlpool Washer, it may be due to load sensing. It is normal to hear the hum of the sensing spins after you have started the washer.
General| Style | top load |
|---|---|
| Color | white |
| Washer Capacity | 3.6 cubic feet |
| Max Spin Speed | 800 revolutions per minute |
| Internal Heater | no |
| Control Panel | electronic |
| Delay Start / End | no |
| Child Lock | no |
| Cycle Signal | yes |
| Steam | no |
| Annual Energy Consumption | 159 kilowatt hours |
| Voltage | 120 volts |
| Current | 15 amperes |
Weight and Dimensions| Depth | 27 inches |
|---|---|
| Height | 43 inches |
| Width | 29 inches |
| Net Weight | 130 pounds |
Key precautions to reduce risks of fire, electric shock, or injury when using the washer.
Guidance on using High Efficiency (HE) detergents for optimal performance and to avoid issues.
Functions of the Start/Pause button, lid lock, and cycle status lights.
Sorting, preparing, and loading garments evenly into the washer for optimal results.
Instructions for adding products, selecting options, starting the wash, and managing operation.
Tips for keeping the washer clean and performing well, including detergent use and lid opening.
Understanding normal sounds, fixing water leaks, and addressing general performance problems.
Troubleshooting issues with draining, spinning, cleaning, stain removal, and detergent use.
