Need help?Do you have a question about the Whirlpool WTW5800SG0 and is the answer not in the manual?
General| Brand | Whirlpool |
|---|---|
| Model Number | WTW5800SG0 |
| Product Type | Top Load Washer |
| Color | White |
| Capacity | 4.3 cu. ft. |
| Agitator | Yes |
| Wash Cycles | 12 |
| Control Type | Electronic |
| Energy Star Certified | Yes |
| Width | 27 in |
| Height | 43 in |
| Depth | 27 in |
| Temperature Settings | Cold, Warm, Hot |
Installation instructions, use & care guides, and owner's manuals for the appliance.
Main top panel, cabinet spacers, and securing clips for top and cabinet assembly.
Components for the lid, including hinges, hinge pads, and mounting screws.
Various screws and clips used for securing cabinet panels and components.
Circuit board, timer, water level switch, and control knobs for appliance operation.
Water inlet valve, thermistor, and drain hose assembly components.
Main wiring harness, clips, and various electrical connectors for system integration.
Rear panel, console panel, and mounting supports for control and rear sections.
Parts related to the agitator, including the clothes mover, dogs, and driven components.
Components for sealing the basket and tub, such as rings and gaskets.
Clips, washers, and screws used to secure the basket, tub, and agitator.
Parts related to the brake and drive tube system, including clutch components.
Gearcase, motor, couplings, and related mounting hardware.
Washing machine pump and its associated retainers and shields.
Main base assembly, including feet, pads, and suspension components.
Centerpost, bearings, and seals critical for the machine's stable operation.
Suspension springs, leveling links, and mechanism springs.
Various clips, receptacles, and connectors for the appliance wiring harness.
Disconnect blocks for motor speed, timer, and lid switch, plus receptacles.
Connectors for E.T.C. control, pressure switch, and cold/hot water valves.
Complete brake and drive tube assembly, including thrust rings and seals.
Brake shoes, springs, caps, and cam release mechanisms.
Components related to the brake cam, including sleeves and drivers.
Main gearcase, cover, seals, and associated mounting screws.
Parts for the agitator shaft, gears, springs, and spin pinion.
Cam followers, agitator cams, thrust bearings, and spin gears.
Touch-up paint, pressurized spray paint, and bulk paint for cosmetic repairs.
Gearcase lubricant and gasket sealer for maintenance and assembly.
Accessory parts including drain protectors and drain hose adapter/extension kits.
To Next Page
