A
April SmithAug 16, 2025
Why is my Whirlpool WTW8000BW Washer not draining and loads are still wet?
- JJeremy WallAug 16, 2025
If your Whirlpool Washer isn't draining or spinning, resulting in wet loads, it could be due to several reasons. First, small items might be trapped in the pump or between the basket and tub; empty pockets and use garment bags for small items to prevent this. Second, cycles with lower spin speeds remove less water; consider using a cycle with a higher spin speed. Lastly, a tightly packed or unbalanced load can prevent proper spinning; evenly arrange the wet load and select RINSE/DRAIN & SPIN to remove excess water.