EasyManua.ls Logo

Whirlpool WWDC 7410 - Washing Machine Description; Operating the Door; First Wash Cycle Preparation

Whirlpool WWDC 7410
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To open the door, hold the door handle and pull the door. Close the door by pressing it without excessive
force until it clicks shut.
1. Worktop
2. Control panel
3. Detergent dispenser
4. Service plate (inside the door)
5. Door
6. Pump access with filter and emergency drain hose (if available) behind the plinth
7. Adjustable feet
DESCRIPTION OF THE WASHING MACHINE
GB 3
BEFORE THE FIRST WASH CYCLE
To remove any residual water used in testing by the manufacturer, we recommend that you carry out
a short wash cycle without laundry.
1. Open the tap.
2. Close the door.
3. Add a small amount of detergent (maximum 1/3 of the quantity the detergent manufacturer
recommends for lighty soiled laundry) to the main wash chamber of the detergent dispenser.
4. Select and start programme “Synthetics” at 60°C (see separate programme chart”).
DOOR
Depending on the model

Related product manuals