Why my Whirlpool Washer does not start even when the Start/Pause button is pressed?
If your Whirlpool Washer doesn't start even after pressing the Start/Pause button, ensure the door is properly closed. Also, check if the Child lock/Lock buttons feature is activated. If so, unlock the buttons by pushing the two buttons marked with the key symbol simultaneously for at least 3 seconds, until the key symbol disappears from the display.
Why is the programme duration on my Whirlpool WWDC-9440 Washer longer than indicated?
The duration of a Whirlpool Washer programme can vary due to factors like excessive foam, load imbalance, or low water temperature. The machine adapts to these conditions, recalculating the duration as needed. For small loads, the program time may be reduced by up to 50%.
What to do if my Whirlpool Washer shows the 'Service' failure indicator?
If the 'Service' failure indicator blinks on your Whirlpool Washer, it indicates an electrical module fault. Push the 'Reset' button for at least 3 seconds.
What to do if my Whirlpool WWDC-9440 shows the “F24” Failure indicator?
General| Washing Capacity | 9 kg |
|---|---|
| Spin Speed | 1400 RPM |
| Capacity | 9 kg |
| Energy Rating | A+++ |
| Color | White |
| Loading Type | Front Load |
| Dimensions (HxWxD) | 850 x 600 x 600 mm |
Covers crucial safety guidelines for operating the washing machine, including child safety and electrical precautions.
Guidelines on choosing and using detergents and additives based on fabric type and soiling.
Step-by-step guide to clean the filter and drain residual water from the machine.
Diagnosing issues with unresponsive or interrupted programs.
Details various failure indicators, their display messages, and troubleshooting steps.
Explains "Service", "Water tap closed", and "Clean pump" indicators and their causes.
Overview of wash programs, their settings, and explanations of chart symbols.
To Next Page
