whiskersupport.com
15
If your cat re-enters the Globe during the Wait Time countdown (red light is on), the Cat
Sensor detects that weight and will not cycle with your cat inside (see page 32). Once
your cat exits, a new countdown will begin.
Empty Cycle
The Empty cycle allows you to empty all of the litter from
the Globe into the Waste Drawer for easy disposal. Use
this cycle to change out the whole bed of litter or before
cleaning the Globe (see page 29).
Press the Empty button to start an Empty cycle.
During an Empty cycle, press any button to pause the
cycle. Press the Cycle button to resume the cycle. Press
the Reset or Empty button to abort the cycle and return
the Globe to the Home position.
How it works:
1. The Globe rotates clockwise. The yellow light on the Control Panel will be on
while cycling.
2. As the Globe rotates, the litter will fall through the Waste Port into the Waste
Drawer.
3. After the litter is emptied, the Globe will stop with the yellow light on and await
your action. (You may need to sweep any remaining litter toward the Waste
Port.)
4. Press any button to return the Globe to the Home position.
IMPORTANT: Supervise and prevent your cat from entering during the Empty Cycle, as
the unit may not detect your cat without litter in it.
Empty Button
To Next Page
Loading...
Need help?
General
