whisker Litter-Robot 3 User Manual

whiskersupport.com
16
Control Panel - Button Functions
Power Button + (Automatic Night Light)
Press and Release: Turns the system power on and off.
Press and Hold: Toggles the Automatic Night Light function on and off (see page 23).
The Litter-Robot arrives with the Automatic Night Light function activated. When the
light sensor detects low light conditions, the Night Light turns on automatically.
Check the status of the Night Light function by covering the light sensor (located above
the Cycle button on the Control Panel) to see if the Night Light comes on or not.
To turn the Night Light function off, press and hold the Power button for about 5 sec-
onds. The Night Light will flash on, then off.
To turn the Night Light function on, press and hold the Power button for about 5 sec-
onds. The Night Light will flash on and, depending on the ambient light, the Night Light
will either stay on (if low light) or turn off (if bright light).
Night Light Sensor
Power Button

whisker Litter-Robot 3 Specifications

General

Weight	24 lbs
Waste Drawer Capacity	Approximately 1 week for one cat
Materials	Plastic
Type	Automatic Litter Box
Litter Type	Clumping Litter
Power Source	AC Adapter
Cycle Time	7 minutes
Warranty	18 months
Color Options	Grey, Beige
Features	Self-cleaning, Automatic
Suitable For	Cats
Entryway	15" wide
Power	15 Volts DC
Globe Opening	15 inches in diameter