whisker Litter-Robot 3 User Manual

whiskersupport.com
28
Liner Tabs
Carbon Filter
The Litter-Robot is equipped with a flexible carbon filter pad for absorbing odors in the
drawer. Easily removed and installed, replace the carbon filter as needed. Under normal
use, one filter should last a few months. The carbon filter is not required for the unit to
function.
Replacement carbon filters (3 count) can be ordered at www.litterrobot.com or by
calling 877-250-7729.
Base Seal Strips
The Litter-Robot is equipped with brush-type Seal Strips that help contain odors within
the Waste Drawer and Base.
Replace the Seal Strips when you notice they are worn flat or peeling up. Make them
last longer by trimming loose edges between replacements. Be careful not to get them
wet when cleaning the Base or they may begin to peel.
Replacement Base Seal Strips can be ordered from Litter-Robot.com or by calling 877-
250-7729.
Carbon Filter
Base Seals

whisker Litter-Robot 3 Specifications

General

Weight	24 lbs
Waste Drawer Capacity	Approximately 1 week for one cat
Materials	Plastic
Type	Automatic Litter Box
Litter Type	Clumping Litter
Power Source	AC Adapter
Cycle Time	7 minutes
Warranty	18 months
Color Options	Grey, Beige
Features	Self-cleaning, Automatic
Suitable For	Cats
Entryway	15" wide
Power	15 Volts DC
Globe Opening	15 inches in diameter