9
OPERATIONS
Initial Settings
Date & Time Setting
1. Once connected with car charger, the device will start
power ON and start recording. Press the OK button to
switch into standby mode.
2. Press and hold the MENU button for 2 seconds twice
then Press the or to select Date/Time. Press OK to
enter into setting.
3. Press or to choose the specific number, press OK to
enter into next setting. Once finished with settings, press
MENU button to return to DVR operation.
NOTE: The MENU button may need to pressed more than
once to return to desired operation of VIDEO, CAMERA,
or PLAYBACK.
MENU Settings
There are 3 available levels; Video , Camera , and
Playback .
NOTE: Video or Camera menus have different option
selections.
4. Press and hold the MENU button for 2 seconds to see
available settings.
5. Press the or to scroll through the settings.
6. Press OK to make a selection.
To Next Page
Loading...
Need help?
General
