Why does my Whistler D16VR DVR image have cross stripe interference?
If you're seeing cross stripe interference in your Whistler DVR images, the “Light Frequency“ setting might be incorrect. To fix this, check the setting for 50Hz or 60Hz in the MENU Settings.
What to do if my Whistler DVR doesn’t work with my SD Card?
If your Whistler DVR isn't working with your SD card, the card might be damaged, or the device may not support that type of memory card. Try removing the SD card and inserting it again. You can also try using another memory card. SanDisk is recommended.
General| Video Resolution | Up to 1080p |
|---|---|
| Wi-Fi | No |
| Memory Card Type | MicroSD |
| Channels | 1 |
| Remote Viewing | No |
| Motion Detection | Yes |
| Hard Drive Capacity | Not applicable |
| Operating Temperature | -10°C to 50°C |
| Power Supply | 12V DC |
To Next Page
