Whistler D16VR User Manual

7
OPERATIONS
Installing the Windshield Bracket
The included windshield bracket securely places the
DVR onto the vehicle’s windshield.
Follow the procedure below to secure the bracket:
1. Insert the threaded collar into the bracket mounting
point on top of the DVR and tighten until snug.
(Threaded collar may be used to insure bracket its
snugly tightened.)
2. If applicable, remove protective film from the suction
cup.
3. Clean the selected area of the windshield for
mounting using a quality glass cleaner.
4. Press the bracket onto the windshield. To secure
the suction cup press the locking tab toward the
windshield.
5. Loosen the knob on the bracket to adjust the angle
of the DVR. Tighten knob securely to secure the
DVR’s position.
STEP 1
STEP 5
STEP 4

Threaded Collar
Adjustable Knob

Whistler D16VR Specifications

General

Brand	Whistler
Model	D16VR
Category	DVR
Language	English