To Next PageTo Next Page
Need help?Do you have a question about the White Rodgers 1F92 and is the answer not in the manual?
General| Display | Digital |
|---|---|
| Backlight | Yes |
| Power Source | Battery or Hardwired |
| Stages | 1 Heat/1 Cool |
| Voltage | 24VAC |
| Battery | 2 x AA Alkaline |
Identifies and explains the function of each button on the thermostat.
Provides technical data including electrical, thermal, and operating ranges.
Instructions for safely removing the existing thermostat from the wall.
Steps for mounting the new thermostat base to the wall securely.
Explains the need to configure the thermostat before powering on for proper operation.
Details terminal designations for multi-stage systems, including heat and cool functions.
Details terminal designations for various heat pump system types.
Provides detailed terminal mappings for different heat pump system configurations.
Details terminal assignments for heat pump systems requiring separate heat and cool signals.
Explains the E2/P switch function for emergency heat and system configuration.
Guides the user on how to access and navigate the thermostat's configuration menus.
Selects the system type, enabling heat pump-specific options.
Configures settings based on the number of heat pump compressors.
Determines if the thermostat controls the fan during electric heat operation.
Adjusts cycle times for heating, cooling, and auxiliary stages.
Sets fan-off/on delays for cooling cycles to optimize air distribution.
Sets a delay for the fan after the heat cycle ends, improving efficiency.
Controls heat pump operation with a fossil fuel auxiliary for efficiency.
Protects compressor from short-cycling by locking it out for a set period.
Allows qualified technicians to temporarily disable compressor lockout for testing.
Enables longer Y1 cycles for cooling with outdoor air for efficiency.
Disables the automatic switching between heating and cooling modes.
Guides on verifying thermostat and system performance.
Instructions to verify the cooling system operates correctly with the thermostat.
Steps to test all heating and cooling stages for proper system function.
Explains how to use the reset button for unresponsive thermostats.
Details the process of resetting the thermostat to factory defaults.
Accesses settings for user-defined preferences and thermostat operation.
Allows locking the keypad to prevent unauthorized changes to settings.
Allows adjustment of the displayed room temperature by up to 5°F.
Starts system operation early to meet programmed temperature setpoints on time.
Configures the thermostat to display temperature in either Fahrenheit or Celsius.
Enables manual control of the fan for a set period.
Speeds up second stage heating engagement when manually adjusting temperature.
Speeds up second stage cooling engagement when manually adjusting temperature.
Displays accumulated compressor runtime in hours.
Displays accumulated auxiliary system runtime in hours.
Enables partial keypad lockout, allowing limited button access.
Enables total keypad lockout, rendering all buttons inoperative.
Allows manual control of heating or cooling without using programmed schedules.
Guides on setting up automatic temperature schedules for comfort and efficiency.
Details the steps to set the clock and day for programming.
Instructions for setting the current hour and minutes on the thermostat.
Instructions for setting the current day of the week.
Steps to select heating/cooling mode and enter time/temperature settings.
Details various settings available within the thermostat's configuration menus.
Starts system operation early to meet programmed temperature setpoints on time.
Configures the thermostat to display temperature in either Fahrenheit or Celsius.
Enables manual control of the fan for a set period.
Speeds up second stage heating engagement when manually adjusting temperature.
Speeds up second stage cooling engagement when manually adjusting temperature.
