What to do if the display blanks out on my White Rodgers 1F95-0671 Thermostat?
- TTerry BarrettJul 26, 2025
To reset the thermostat, remove the wires from terminals R and C (do not short them together) and remove the batteries for 2 minutes.
What to do if the display blanks out on my White Rodgers 1F95-0671 Thermostat?
To reset the thermostat, remove the wires from terminals R and C (do not short them together) and remove the batteries for 2 minutes.
What to do if my White Rodgers 1F95-0671 has a blown fuse or tripped circuit breaker?
Replace the fuse or reset the breaker.
What to do if the furnace power switch is OFF on my White Rodgers 1F95-0671?
Turn the switch to the ON position.
What to do if my White Rodgers 1F95-0671 has a loose connection to the system?
Tighten the connections.
What to do if the furnace blower compartment door is loose on my White Rodgers 1F95-0671 Thermostat?
Replace the door panel in the proper position to engage the safety interlock or door switch.
What to do if I forgot the Keypad Lockout Code on my White Rodgers 1F95-0671 Thermostat?
Press the menu button and hold in Lockout Code for 20 seconds.
What to do if there is a possible short in wiring on my White Rodgers 1F95-0671 Thermostat?
Check each wire connection to verify they are not shorted or touching together.
Warns about electrical shock and equipment damage during installation.
Describes the purpose of each terminal on the thermostat.
Illustrates typical wiring configurations for various systems.
Illustrates connections for single and multi-stage heat pumps.
Details the icons, indicators, and temperature readings on the main screen.
Configures system type, cooling savings, and anticipation rates.
Configures dual fuel, compressor delay, and reversing valve output.
Adjusts cycle rates, compressor lockout, and keypad lockout.
Configures dual fuel operation and compressor shutoff based on outdoor temp.
Procedure for resetting the thermostat to factory settings.
Warns about electrical shock and equipment damage during installation.
Describes the purpose of each terminal on the thermostat.
Illustrates typical wiring configurations for various systems.
Illustrates connections for single and multi-stage heat pumps.
Details the icons, indicators, and temperature readings on the main screen.
Configures system type, cooling savings, and anticipation rates.
Configures dual fuel, compressor delay, and reversing valve output.
Adjusts cycle rates, compressor lockout, and keypad lockout.
Configures dual fuel operation and compressor shutoff based on outdoor temp.
Procedure for resetting the thermostat to factory settings.
| Brand | White Rodgers |
|---|---|
| Model | 1F95-0671 |
| Type | Programmable Thermostat |
| Display | Digital |
| Power Source | Battery or Hardwired |
| Backlight | Yes |
| Temperature Range | 40°F to 90°F |
| Program Schedule | 7-day programmable |
| Battery | 2 x AA |
| Weight | 0.5 lbs (227 g) |












Loading...