To Next PageTo Next Page
Need help?Do you have a question about the White Rodgers Comfort-Set 1F95-371 and is the answer not in the manual?
General| Brand | White Rodgers |
|---|---|
| Model | Comfort-Set 1F95-371 |
| Category | Thermostat |
| Language | English |
Details and descriptions of each button on the thermostat, including their functions.
Explains the various indicators and information shown on the thermostat's display screen.
Details configuration options and settings accessible through the User Menu, with reference pages.
Describes security features to lock the thermostat keypad, including partial and total lockout options.
Instructions for controlling the thermostat manually without programming schedules.
Step-by-step guide to setting the clock, day, and program parameters for the thermostat.
Allows adjustment of the room temperature display higher or lower by up to 5°F.
System starts operating early to ensure building temperature reaches setpoint at the specified time.
Allows configuration of the thermostat to display temperature in Fahrenheit or Celsius.
Allows the fan to run for a predetermined period, independent of heating or cooling cycles.
Controls whether the thermostat emits a tone when any key is pressed.
Enables second stage heating to activate when temperature is raised significantly.
Enables second stage cooling to activate when temperature is lowered significantly.
Enables display of outdoor temperature using an optional remote sensor.
Allows running programs remotely via telephone with optional X10 responder.
Displays accumulated compressor run time in hours and allows resetting to 00.
Provides security by locking the keypad, with partial or total lockout options.
Automatically switches between heating and cooling modes as needed.
Thermostat comes with pre-programmed settings that can be used directly.
Protects the compressor from premature failure by ensuring a minimum off-time between cycles.
Allows the fan to operate continuously through programmed time periods for air circulation.
Provides a reminder to change or clean the air filter after a set amount of fan operation time.
Provides diagnostic codes (CHECK SYS, CHECK STAT) for system and thermostat issues.
Allows overriding the current program for a specific duration or until a set time.
Allows programming a constant temperature for a set number of vacation days.
Allows sensing indoor temperature at multiple locations using optional remote sensors.
Conveniently adjusts the thermostat clock between Standard and Daylight Savings Time.
Allows programming the thermostat even when detached from the wallplate for a limited time.
Describes the thermostat's behavior and initial settings after a complete power outage.
Determines the optimum time to activate the second stage based on system performance and temperature changes.
